In this section:

General

How can I get quick access to information about usage on the command line?

Use the -help command line switch:

jtestcli.exe -help

How can I work with Jtest via proxy?

To work with Jtest, ensure that the system properties for the HTTPS protocol are configured. At a minimum, you must configure https.proxySet=true, https.proxyHost=[hostname], and https.proxyPort=[port number]. If your proxy server requires authentication, you can configure your credentials with the https.proxyUser and https.proxyPassword properties.

Your command line may resemble the following:

java -Dhttps.proxySet=true -Dhttps.proxyHost=myserver.example.com -Dhttps.proxyPort=8080 -Dhttps.proxyUser=user1 -Dhttps.proxyPassword=MyPassword

In addition, you can configure the https.nonProxyHosts property to specify hosts where connection via proxy is not required.

If you use Jtest on desktop with Eclipse or IntelliJ IDEA, the proxy settings are automatically detected and do not need to be configured in the command line.

Installation

How can I prevent my machine ID from floating?

Changes in the network environment may affect the interface that is used to compute your machine ID and result in machine ID instability. You can use the PARASOFT_SUPPORT_NET_INTERFACES environment variable to specify a stable interface and prevent the machine ID from floating.

1. Set up the PARASOFT_SUPPORT_NET_INTERFACES environment variable.

2. Set the variable value to a stable Ethernet network interface. Do not use virtual, temporary or loopback interfaces. 
   - On Windows: Set the value to the MAC address of your network card. You can use the ipconfig -all command to obtain the address.  For example:

   SET PARASOFT_SUPPORT_NET_INTERFACES=00-10-D9-27-AC-85

   - On Linux: Set the value to one of the network interfaces from the "inet" or "inet6" family. You can use the ifconfig command to obtain the list of available interfaces. For example: 

   export PARASOFT_SUPPORT_NET_INTERFACES=eth1

If the problem persists, you can obtain diagnostic information by setting up the environment variable PARASOFT_DEBUG_NET_INTERFACES and setting its value to true. This will print to the standard output the checking procedure that can be shared with technical support, as well as the interface that is used to compute your machine ID. The interface will be marked with the [SELECTED] prefix.

Testing and Analysis

What if the static analysis performance decreased after Jtest was updated to a newer version?

The new version of Jtest may require more memory to run static analysis. You can increase memory allocation by configuring the -Xmx option in the [INSTALL_DIR]/etc/jtestcli.jvm configuration file.

What if Jtest reports compilation problems when building the project with Maven?

If Jtest reports compilation problems related to importing dependencies in the Maven test scope, try running the jtest:jtest goal with the mvn test command:

mvn test jtest:jtest

Why does running the jtest:coverage goal (Maven) or jtest-coverage task (Gradle) fail the build?

The Jtest coverage goal/task was dropped with release 10.2.2 (plugin version 1.2.4) and is no longer available (see Migration From 10.x to 10.2.2 or later). Executing this goal fails the build with the following messages:

[ERROR] Could not find goal 'coverage' in plugin com.parasoft.jtest:jtest-maven-plugin. (Maven)

Task 'jtest-coverage' not found (Gradle)

What if my Gradle build fails when configured to perform test impact analysis with Jtest?

A Gradle build may fail when you perform test impact analysis with Jtest on multi-module projects if a submodule does not contain tests that are identified as affected tests during test impact analysis. To prevent a Gradle build from failing when no tests are found, configure the following option:
setFailOnNoMatchingTests(false)

What if Jtest cannot collect coverage information for tests run with Gradle?

To enable collecting coverage, Jtest automatically configures the JVM arguments for the Jtest coverage agent. Overriding these arguments prevents Jtest from collecting coverage data. If your Gradle build script modifies JVM arguments, ensure they are added (+=) to other JVM arguments to prevent overriding:

What if Jtest cannot resolve required dependencies while running analysis or executing tests with Maven?

To ensure that all of the required dependencies are resolved, you may need to enable resolving transitive dependencies by adding the following option to your command line:

-Djtest.resolve.transitive=true

Why is test impact analysis with Maven re-running one or more tests that are NOT affected by code changes?

• Test impact analysis re-runs entire test suites when at least one test included in the test suit is affected by code changes. As a result, if the test suite contains tests that are not affected, they are re-run as well.
• In rare cases, test impact analysis may be unable to recognize the include or exclude pattern.  As a workaround, you can filter your tests manually; see Manually Filtering Tests to Re-run for details.

How can I test source files where a byte order mark (BOM) appears at the start of the text stream?

To ensure that files that include BOM are properly processed and tested, you need to configure Jtest to remove BOM when the file is parsed. Add one of the following settings to the jtest.properties configuration file:

• jtest.parser.bom=remove - removes BOM and leaves the original file encoding unchanged.
• jtest.parser.bom=recognize - removes BOM and overrides the original fine encoding with the encoding defined by BOM

What if Jtest reports flaky tests as failed when running tests with Maven or Gradle?

By default, Jtest does not differentiate between tests that always fail when run on the same code and tests that can either pass or fail (flaky tests).  You can configure Jtest to recognize flaky tests by enabling the deprecated XML processing mechanism to be used for test execution.  Add the following option in the jtestcli.properties configuration file:

jtest.unittest.xml.results.processing.enabled=true

Note that enabling the deprecated XML processing mechanism may slow down test execution.

What if a file cannot be tested because its name is inconsistent between the source control and the testing input?

To correctly process and analyze a file, Jtest must be able to match the file name you provided in the testing scope (i.e. the file name in your project) with the file name in the source control system. For this reason, if you are using a case-sensitive source control system, such a Git, you need to ensure that the file name capitalization is identical.

Reports

What if some characters fail to be properly displayed in Jtest reports?

Why are the issue tracking tags not available in the report after I run Jtest with Maven?

Your report may not include the issue tracking tags you have configured (see Associating Tests with Development Artifacts) if Jtest is unable to resolve one or more required dependencies. To prevent this, see What if Jtest cannot resolve required dependencies while running analysis or executing tests with Maven?.

Working in the IDE

Why does test execution fail when the path to UTA files exceeds 250 characters?

On Windows, a file path longer than 250 characters may prevent accessing the file. If your workspace is deeply nested in the folder structure, the path to some UTA files may exceed 250 characters. If the files that are key to test execution cannot be accessed, test execution fails.

To ensure that the path to the UTA files does not exceed the limit, you may consider moving your workspace folder higher in the folder hierarchy.

What if tests fail to execute in IntelliJ IDEA?

IntelliJ IDEA versions earlier than 2017.3 do not have full support for JUnit 5. As a result, tests may fail to execute if JUnit 5 dependencies are included in your project. For example, the problem may occur when you add the Unit Test Assistant Library container (see Automatically Adding the Required Libraries) or try to execute tests included in Jtest example projects.

For this reason, it is recommended to upgrade IntelliJ IDEA to version 2017.3 or higher. Alternatively, you can update the classpath, as described in the JUnit 5 User Guide.

If the problem occurred after automatically adding the Unit Test Assistant container, you may need to manually remove it.

What if the Jtest run configuration does not work in IntelliJ IDEA?

In rare cases, the Jtest run configuration may not work due to a known issue in some IntelliJ versions (see https://youtrack.jetbrains.com/issue/IDEA-223124 for details). If this happens, you need restart your IDE. The Jtest run configuration will be working after the restart.