Introduction

You can perform analysis and testing by executing the Jtest goals for Maven for the main project directory. It is not necessary to build the tested project prior to analysis unless your project has never been built before and you need to ensure that external project dependencies are available, or you test a multi-module project. We recommend compiling multi-module projects before running analysis to enable Jtest to use artifacts from the local repository, reducing the amount of time necessary to test and analyze code.

As an aggregator, the Jtest Plugin form Maven must be executed only once during the build.

Running Static Analysis

To perform static analysis on your code:

1. Ensure that the Jtest Plugin for Maven is set up (see Configuring the Jtest Plugin for Maven).

2. Execute the jtest:jtest goal. Your command line may resemble the following:

   mvn jtest:jtest

   The Jtest Plugin for Maven will collect the necessary build data in the .json file, and analyze your code depending on the configuration you provided (see Configuring Jtest Execution).

3. Review the analysis results (see Reviewing Results).

If Jtest reports compilation problems related to importing dependencies in the Maven test scope, try running the jtest:jtest goal with the mvn test command:

mvn test jtest:jtest

 By default, test sources are excluded from analysis. To analyze test code, disable the excludeTestSources option; see Jtest Goals Reference for Maven.

Executing and Collecting Coverage for Unit Tests

You can include unit test results in the Jtest report by running your tests with the jtest:jtest and jtest:agent goals, and the dedicated Unit Tests built-in test configuration:

1. Ensure that the Jtest Plugin for Maven is set up (see Configuring the Jtest Plugin for Maven).

2. Execute the jtest:agent and jtest:jtest goals with Maven. Ensure that the tests and classes are compiled before the jtest:agent goal is run.  Your command line may resemble the following:

   mvn clean test-compile jtest:agent test jtest:jtest -Djtest.config="builtin://Unit Tests"

By default, Jtest collects coverage data for executed tests. To disable collecting coverage, enable the jtest.coverage.skip option (see Jtest Goals Reference for Maven for details).

Executing the jtest:agent goal before the classes are compiled, may result in empty coverage. If your build uses Tycho plugins, or any other plugins that are detached from the default lifecycle, invoke the dedicated (non-default) compiler to ensure that the classes are properly compiled and coverage information is collected. Your command line may resemble the following:

mvn clean tycho-compiler:compile jtest:agent verify jtest:jtest -Djtest.config="builtin://Unit Tests"

If you skip a test by calling a method from the org.junit.Assume (JUnit 4) or org.junit.jupiter.api.Assumptions (JUnit 5) class, Jtest collects coverage for code lines executed before the method is called. This coverage information is not associated with any test in the coverage report if the tests are executed with the JUnit 4 runner.

About the jtest:agent Goal

The jtest:agent goal generates the Jtest agent settings based on the build modules, and sets the javaagent VM agument in the properties specified with the agentPropertyNames parameter in the initialize phase.

By default, it tries to inject javaagent VmArg into maven-surefire-plugin and eclipse-test-plugin through specific properties.

Prerequisites for using the jtest:agent goal with the Maven test plugins:

• tests must be executed in the forked process (for example, with the parameters forkCount or forkMode)
• additional VmArgs must contain Jtest javaagent VmArgs (the argLine parameter)

The jtest:agent goal attempts to automatically configure the Maven test plugins (maven-surefire-plugin and tycho-surefire-plugin) by setting up the properties of their VmArgs parameters (by default through the argLine and tycho.testArgLine properties). You can customize the default values of these parameters if one of the following ways:

• Through the default property. The jtest:agent goal will extend the properties with the Jtest javaagent VmArg :

  <project>
    <!-- ... -->
    <properties>
      <!-- argLine property which will be extended by jtest:agent goal --->
      <argLine>-Xmx=1024m -XX:MaxPermSize=256m</argLine>
    </properties>
    <!-- ... -->
    <build>
      <plugins><!-- or pluginManagement -->
        <plugin>
          <artifactId>maven-surefire-plugin</artifactId>
  		<configuration>
            <forkCount>1</forkCount>
            <!-- do not configure argLine parameter here -->
          </configuration>
        </plugin>
      </plugin>
    </build>
  </project>

• Through a parameter value with an injected custom property:

  <project>
    <!-- ... -->
    <build>
      <plugins>
        <plugin>
          <groupId>com.parasoft.jtest</groupId>
          <artifactId>jtest-maven-plugin</artifactId>
          <version>2020.1.0</version>
  		<configuration>
            <!-- jtest:agent goal will set Jtest Java agent VmArg into properties below --> 
            <agentPropertyNames>jtest.argLine</agentPropertyNames>
            <!-- optional coverage block with parameters identical as in offline coverage -->
            <coverage>
              <!-- ... -->
            </coverage> 
          </configuration>
        </plugin>
        <plugin>
          <artifactId>maven-surefire-plugin</artifactId>
          <configuration>
              <argLine>${jtest.argLine} -Xmx=1024m -XX:MaxPermSize=256m</argLine>
          </configuration>
        </plugin>
      </plugin>
    </build>
  </project>

Executing Tests and Collecting Test Coverage for Tycho Builds

Jtest supports executing JUnit 4 tests and collecting test coverage for Tycho builds. However, due OSGi limitations, tests executed with the tycho-surefire-plugin require extended tycho-surefire configuration:

1. Deploy the runtime.jar file shipped with Jtest in [INSTALL_DIR]/integration/coverage to one of the following:

   - The Maven repository. Your command line may resemble the following:

   mvn deploy:deploy-file -Dfile=C:\parasoft\jtest\integration\coverage\runtime.jar -DrepositoryId=REPOSITORY_ID -Durl=REPOSITORY_URL -DartifactId=runtime-jtest -DgroupId=com.parasoft.jtest -Dversion=2020.1.0

   - The local Maven repository. Your command line may resemble to following:

   mvn install:install-file -Dfile=<C:\parasoft\jtest\integration\coverage\runtime.jar -DgroupId=com.parasoft.jtest -DartifactId=runtime-jtest -Dversion=2020.1.0 -Dpackaging=jar

2.  Extend  your tycho-surefire configuration by adding deployed the artifact as a framework extension. The configuration may resemble the following:
   

   <plugin>
       <groupId>org.eclipse.tycho</groupId>
       <artifactId>tycho-surefire-plugin</artifactId>
       <version>${tycho-version}</version>
           <configuration>
               <frameworkExtensions>
                   <frameworkExtension>
                       <groupId>com.parasoft.jtest</groupId>
                       <artifactId>runtime-jtest</artifactId>
                       <version>2020.1.0</version>
                   </frameworkExtension>
               </frameworkExtensions>
             ...
   </plugin>

Alternatively, if you execute test without collecting coverage information, you can configure Jtest to obtain test results using the deprecated XML processing mechanism by adding the following option in the jtestcli.properties configuration file:

jtest.unittest.xml.results.processing.enabled=true

This will enable Jtest to include test results for Tycho builds in the Jtest report. Coverage data will not be included.

Note that enabling the deprecated XML processing mechanism may slow down test execution.

Collecting Application Coverage

Jtest's coverage agent allows you to collect coverage data during manual or automated tests performed on a running application. See Application Coverage for information about collecting application coverage with Jtest.

Test Impact Analysis

<build>
    <plugins>
        <plugin>
            <groupId>com.parasoft.jtest.tia</groupId>
            <artifactId>tia-maven-plugin</artifactId>
            <version>2020.1.0</version>
        </plugin>
    </plugins>
</build>

mvn tia:affected-tests test -Djtest.referenceCoverageFile=target/jtest/coverage.xml -Djtest.referenceReportFile=target/jtest/report.xml -Djtest.runFailedTests=false -Djtest.runModifiedTests=true -Djtest.home=$JTEST_HOME -Djtest.settings=jtestcli.properties

mvn tia:affected-tests test

 <build>
        <plugins>
            <plugin>
                <groupId>org.apache.maven.plugins</groupId>
                <artifactId>maven-surefire-plugin</artifactId>
                <version>2.22.2</version>
            </plugin>
        </plugins>
        <pluginManagement>
            <plugins>
                <plugin>
                    <groupId>org.apache.maven.plugins</groupId>
                    <artifactId>maven-surefire-plugin</artifactId>
                    <configuration>
                        <testFailureIgnore>true</testFailureIgnore>
                        <includes>
                            <include></include>
                        </includes>
                        <excludes>
                            <exclude></exclude>
                        </excludes>
                    </configuration>
                </plugin>
            </plugins>
        </pluginManagement>
    </build>

mvn tia:affected-tests test -Djtest.referenceCoverageFile=target/jtest/coverage.xml -Djtest.referenceReportFile=target/jtest/report.xml -Djtest.settings=jtestcli.properties -Djtest.testFilter="**/*Test.java, !**/ProblemTest.java"