In this section:

Introduction

The Multiple Responses Generator is a powerful tool that allows you to easily handle hierarchical data scenarios, one-to-many asynchronous messaging, and more.

For a piece of XML (input), the name of an XML element (elementName), and the URL of a backend asset (backendURL), the Multiple Responses Generator finds each occurrence of elementName in input and sends the occurrences separately to backendURL. The backend asset is a virtual asset configured to respond to messages with elementName as their root element and sends back responses to the Multiple Responses Generator. Once it has these responses, the Multiple Responses Generator aggregates them together into a single XML document for use in responses.

Requirements

• Parasoft Virtualize

Installation

1. Extract the Multiple Responses Generator JAR file from the archive downloaded from the Parasoft marketplace.
2. Open Virtualize and go to Parasoft > Preferences > System Properties.
3. Click Add JARs and select the Multiple Responses Generator JAR file.
4. Click Apply.
5. Restart Virtualize.

After performing this setup, you will be able to see the Multiple Responses Generator tool in the list of tools available to attach to a message responder.

Configuration

The Multiple Responses Generator is controlled using two main sets of options. The options in the Required Configuration section are required for the Multiple Responses Generator to function while the options in the Optional Configuration section grant more granular control for advanced scenarios.

Required Configuration

The following options must be configured in order for the Multiple Responses Generator to function.

Optional Configuration

Usage

The Multiple Responses Generator can be attached to any XML output of a Parasoft Virtualize message responder. This encompasses the Incoming Request > Payload for any XML-based responders or the Incoming Request > Payload Converted to XML for any non-XML based responders. The basic procedure for using the Multiple Responses Generator is described below. A more detailed description is provided in Example Scenarios.

1. Create a frontend asset with one or more responders.
2. For each responder that needs the asset, attach a Multiple Responses Generator to either the Incoming Request > Payload output of the message responder (if the responder will handle XML Input) or Incoming Request > Payload Converted to XML output of the message responder (if the responder will handle non-XML input).
3. Configure the Multiple Responses Generator with at least the Name of element to send to backend asset and Backend Asset URL.
4. Create a backend asset to handle the messages that the Multiple Responses Generator will send. Be sure the backend asset is deployed at the URL specified in Backend Asset URL in the Multiple Responses Generator.
5. Attach an XML Data Bank or Text Data Bank to the Response XML output of the Multiple Responses Generator and configure it to pull out the aggregated responses.
6. Use the aggregated responses in your response.

Example Scenarios

While there are many scenarios that the Multiple Responses Generator can handle, this section provides examples for those used most frequently.

Handling Lists with a Dynamic Number of Elements

The most common scenario handled by the Multiple Responses Generator is messages that contain lists with a dynamic number of elements. For example:

<root>
 <items>
  <item>
   <name>Name1</name>
    <id>1</id>
  </item>
  <item>
   <name>Name2</name>
    <id>2</id>
  </item>

This request can contain N sub-requests, where N >= 1. The response we will expect looks like this:

<root>
 <itemResponses>
  <itemResponse>
   <balance>10</balance>
  </itemResponse>
  <itemResponse>
   <balance>20</balance>
 </itemResponse>

Using the process described in Usage, the following instructions will help you set up an asset with the above requests and responses.

1. Create a frontend asset with one or more responders:
   1. Right-click the VirtualAssets project and choose Add New > Virtual Asset (.pva) File. 
   2. Enter Example1-Frontend in the File Name field when prompted and click Next. 
   3. Choose Empty from the list of options on the next screen and click Finish. 
   4. Right-click Responder Suite in the newly created Example1-Frontend.pva and choose Add New > Responder. 
   5. In the window that appears, choose Literal Message Responder and click Finish
2. For each responder that needs it, attach a Multiple Responses Generator to either the Incoming Request > Payload output of the message responder (if the responder will handle XML Input) or Incoming Request > Payload Converted to XML output of the message responder (if the responder will handle non-XML input. 
   1. Right-click the Literal Message Responder and choose Add Output…
   2. In the window that appears, choose Payload in the Incoming Request section and choose Multiple Responses Generator under Common Tools. 
   3. Click Finish.
3. Configure the Multiple Responses Generator with at least the Name of element to send to backend asset and Backend Asset URL.
   1. In the Name of element to send to backend asset field, enter item.
   2. In the Backend Asset URL field, enter http://localhost:9080/Example1-Backend.
   3. In the Optional section, enter itemResponses.

   4. Create a backend asset to handle the messages that the Multiple Responses Generator will send. Be sure the backend asset is deployed at the URL specified in Backend Asset URL in the Multiple Responses Generator.

      For simplicity, we will use a fixed response on the backend. However, the Example1-Backend.pva in the archive downloaded from the Marketplace uses a dynamic response.

4. Right-click on the VirtualAssets project and choose Add New > Virtual Asset (.pva) File. 
5. Enter Example1-Backend in the File Name field when prompted and click Next. 
6. Choose Empty from the list of options on the next screen and click Finish. 
7. In the newly created Example1-Backend.pva, right-click the Responder Suite and choose Add New > Responder. 
8. Choose Literal Message Responder in the next screen and click Finish.

9. Enter the following XML:

   <itemResponse>
    <balance>10</balance>
   </itemResponse>

10. Attach an XML Data Bank or Text Data Bank to the Response XML output of the Multiple Responses Generator and configure it to pull out the aggregated responses.
    1. In the Example1-Frontend.pva, right-click MultipleResponsesGenerator and choose Add output…
    2. Choose Response XML on the left side and choose XML Data Bank on the right side. 
    3. Click Add XPath.
    4. Click the line that appears in the Selected XPaths column and click Modify.
    5. Change the XPath field to /*
    6. Choose Entire Element from the Extract menu. 
    7. Choose Data source column on the left-hand side of the editor and enter responses in the Custom column name field. 
    8. Click OK.

11. To use the aggregated responses in your response, double-click Literal Message Responder and enter the following into the text field:

    <root>
    	${responses}
    </root>

The following diagram describes the complete scenario: