In this section:

General

How can I get quick access to information about usage on the command line?

Use the -help command line switch:

jtestcli.exe -help

How can I work with Jtest via proxy?

Typically, if you connect through a proxy server, you need to configure the connection by passing protocol-specific system properties to the JVM – using the -D command line option.

To work with Jtest, ensure that the system properties for the HTTPS protocol are configured. At a minimum, you must configure https.proxySet=true, https.proxyHost=[hostname], and https.proxyPort=[port number]. If your proxy server requires authentication, you can configure your credentials with the https.proxyUser and https.proxyPassword properties.

Your command line may resemble the following:

java -Dhttps.proxySet=true -Dhttps.proxyHost=myserver.example.com -Dhttps.proxyPort=8080 -Dhttps.proxyUser=user1 -Dhttps.proxyPassword=MyPassword
In addition, you can configure the https.nonProxyHosts property to specify hosts where connection via proxy is not required.

If you use Jtest on a desktop with Eclipse or IntelliJ IDEA, Jtest automatically detects and uses the proxy settings specified in Eclipse or IntelliJ IDEA. No additional configuration is required.

What if Mac OS prevents the user from running Java?

If the following dialog appears: "java" cannot be opened because the developer cannot be verified, follow the procedure below:

  1. Click Cancel in the pop-up dialog.
  2. Go to Mac OS System Preferences and choose Security & Privacy.
  3. Under General settings, click the Allow Anyway button to enable Java.
  4. Re-run the Jtest action that prompted the dialog to appear. 
  5. When the dialog appears: macOS cannot verify the developer of "java". Are you sure you want to open it?, click Open.

See also https://support.apple.com/en-us/HT202491.

Installation

How can I prevent my machine ID from floating?

Changes in the network environment may affect the interface that is used to compute your machine ID and result in machine ID instability. You can use the PARASOFT_SUPPORT_NET_INTERFACES environment variable to specify a stable interface and prevent the machine ID from floating.

  1. Set up the PARASOFT_SUPPORT_NET_INTERFACES environment variable.

  2. Set the variable value to a stable Ethernet network interface. Do not use virtual, temporary or loopback interfaces. 
    - On Windows: Set the value to the MAC address of your network card. You can use the ipconfig -all command to obtain the address.  For example:

    SET PARASOFT_SUPPORT_NET_INTERFACES=00-10-D9-27-AC-85

    - On Linux: Set the value to one of the network interfaces from the "inet" or "inet6" family. You can use the ifconfig command to obtain the list of available interfaces. For example: 

    export PARASOFT_SUPPORT_NET_INTERFACES=eth1

If the problem persists, you can obtain diagnostic information by setting up the environment variable PARASOFT_DEBUG_NET_INTERFACES and setting its value to true. This will print to the standard output the checking procedure that can be shared with technical support, as well as the interface that is used to compute your machine ID. The interface will be marked with the [SELECTED] prefix.

How to remove jtestcli and JRE from quarantine to allow their execution on Mac OS?

If you are a Mac OS user, you will encounter an issue with executing Jtest since it does not have the application format typical for Mac OS and it is downloaded outside the App Store. Therefore, both jtestcli and the included JRE will be placed in quarantine.

This is a common issue for all the non-App Store applications. You can manually allow each executable to open in the Mac OS Privacy & Security system settings (see https://support.apple.com/en-us/HT202491). To easily remove the quarantine attribute from these files automatically, run the jtest_installation_folder/bin/remove_quarantine_flag.sh script.


Testing and Analysis

What if the static analysis performance decreased after Jtest was updated to a newer version?

The new version of Jtest may require more memory to run static analysis. You can increase memory allocation by configuring the -Xmx option in the [INSTALL_DIR]/etc/jtestcli.jvm configuration file.

What if Jtest reports compilation problems when building the project with Maven?

If Jtest reports compilation problems related to importing dependencies in the Maven test scope, try running the jtest:jtest goal with the mvn test command:

mvn test jtest:jtest

Why does running the jtest:coverage goal (Maven) or jtest-coverage task (Gradle) fail the build?

The Jtest coverage goal/task was dropped with release 10.2.2 (plugin version 1.2.4) and is no longer available (see Migration From 10.x to 10.2.2 or later). Executing this goal fails the build with the following messages:

[ERROR] Could not find goal 'coverage' in plugin com.parasoft.jtest:jtest-maven-plugin. (Maven)

Task 'jtest-coverage' not found (Gradle)

What if my Gradle build fails when configured to perform test impact analysis with Jtest?

A Gradle build may fail when you perform test impact analysis with Jtest on multi-module projects if a submodule does not contain tests that are identified as affected tests during test impact analysis. To prevent a Gradle build from failing when no tests are found, configure the following option:
setFailOnNoMatchingTests(false)

What if Jtest cannot collect coverage information for tests run with Gradle?

To enable collecting coverage, Jtest automatically configures the JVM arguments for the Jtest coverage agent. Overriding these arguments prevents Jtest from collecting coverage data. If your Gradle build script modifies JVM arguments, ensure they are added (+=) to other JVM arguments to prevent overriding:

(error) jvmArgs = [
'--module-path', classpath.asPath,
'--add-modules', 'ALL-MODULE-PATH',
'--add-reads', "$moduleName=junit",
'--patch-module', "$moduleName=" + files(sourceSets.test.java.outputDir).asPath

]

(tick) jvmArgs += [
'--module-path', classpath.asPath,
'--add-modules', 'ALL-MODULE-PATH',
'--add-reads', "$moduleName=junit",
'--patch-module', "$moduleName=" + files(sourceSets.test.java.outputDir).asPath

]

Why is test impact analysis with Maven re-running one or more tests that are NOT affected by code changes?

  • Test impact analysis re-runs entire test suites when at least one test included in the test suit is affected by code changes. As a result, if the test suite contains tests that are not affected, they are re-run as well.
  • In rare cases, test impact analysis may be unable to recognize the include or exclude pattern.  As a workaround, you can filter your tests manually; see Manually Filtering Tests to Re-run for details.

How can I test source files where a byte order mark (BOM) appears at the start of the text stream?

To ensure that files that include BOM are properly processed and tested, you need to configure Jtest to remove BOM when the file is parsed. Add one of the following settings to the jtest.properties configuration file:

  • jtest.parser.bom=remove - removes BOM and leaves the original file encoding unchanged.
  • jtest.parser.bom=recognize - removes BOM and overrides the original fine encoding with the encoding defined by BOM

What if Jtest reports flaky tests as failed when running tests with Maven or Gradle?

By default, Jtest does not differentiate between tests that always fail when run on the same code and tests that can either pass or fail (flaky tests).  You can configure Jtest to recognize flaky tests by enabling the deprecated XML processing mechanism to be used for test execution.  Add the following option in the jtestcli.properties configuration file:

jtest.unittest.xml.results.processing.enabled=true

Note that enabling the deprecated XML processing mechanism may slow down test execution.

What if tests fail when running PowerMock with mockito-inline?

When running PowerMock tests with mockito-inline on the classpath before powermock, you might encounter test failures with the following exception:

NotAMockException: Argument should be a mock, but is: class java.lang.Class

This is caused by an issue with how PowerMock interacts with the mockito-inline mock maker (see PowerMock issue for details). 

There are several possible solutions depending on your requirements:

There are some limitations concerning the classes and methods which can be mocked. For details, see Mockito static and constructor mocking limitations.

Updating PowerMock tests (static mocking) - Example

The following PowerMock calls which cause an issue can be easily modified:

  • thenReturn()
  • doReturn()
  • doNothing()

For example:

PowerMockito.when(MyClass.staticCall(any())).thenReturn("value");
PowerMockito.when(MyClass.staticCall(any())).thenReturn("value1", "value2");
PowerMockito.doReturn("value").when(MyClass.class);
MyClass.staticCall(any());
PowerMockito.doNothing().when(MyClass.class, "staticCall", any());

Updated code:

PowerMockito.when(MyClass.staticCall(any())).thenAnswer(invocation -> "value");
PowerMockito.when(MyClass.staticCall(any())).thenAnswer(invocation -> "value1").thenAnswer(invocation -> "value2");
PowerMockito.doAnswer(invocation -> "value").when(MyClass.class);
MyClass.staticCall(any());
PowerMockito.doAnswer(invocation -> null).when(MyClass.class, "staticCall", any());

Updating PowerMock tests (verify) - Example

When calling verifyStatic() or verifyPrivate() you might encounter the following test exception:

org.mockito.exceptions.misusing.NotAMockException: 
Argument passed to verify() is of type Class and is not a mock!
Make sure you place the parenthesis correctly!
See the examples of correct verifications:
    verify(mock).someMethod();
    verify(mock, times(10)).someMethod();
    verify(mock, atLeastOnce()).someMethod();

The code should be refactored to manually verify the required call. 

For example:

PowerMockito.when(MyClass.staticCall(any())).thenAnswer(invocation -> "value");
...
PowerMockito.verifyStatic(MyClass.class, times(1));
MyClass.staticCall(any());

Updated code:

int counter[] = new int[]{0};
PowerMockito.when(MyClass.staticCall(any())).thenAnswer(invocation -> {
    counter[0]++;
    return "value";
});
...
assertEquals(1, counter[0]);

For verifyPrivate() the only solution is to manually verify the required call since Mockito does not support mocking private methods.

For example:

PowerMockito.mockStatic(MyClass.class);
PowerMockito.when(MyClass.class, "privateStatic", any()).thenAnswer(invocation -> inv.callRealMethod());
...
PowerMockito.verifyPrivate(MyClass.class, times(1)).invoke("privateStatic");

Updated code:

PowerMockito.mockStatic(MyClass.class);
int counter[] = new int[]{0};
PowerMockito.when(MyClass.class, "privateStatic", any()).thenAnswer(invocation -> {
    counter[0]++;
    return inv.callRealMethod();
});
...
assertEquals(1, counter[0]);

Converting PowerMock tests to Mockito (static mocking) - Example

PowerMock code:

PowerMockito.mockStatic(MyClass.class);
PowerMockito.when(MyClass.staticCall(any())).thenReturn("value");
// test code
PowerMockito.verifyStatic(MyClass.class, times(1));
MyClass.staticCall(any());

Code converted to Mockito:

try (MockedStatic<FunctionsToMock> mocked = mockStatic(FunctionsToMock.class)) {
    mocked.when(() -> FunctionsToMock.staticCall(any())).thenReturn("value");
    // test code
    mocked.verify(() -> FunctionsToMock.staticCall(any()), times(1));
}

Converting PowerMock tests to Mockito (constructor mocking) - Example

PowerMock code:

FunctionsToMock mock = Mockito.mock(FunctionsToMock.class);
PowerMockito.whenNew(FunctionsToMock.class).withAnyArguments().thenReturn(mock);
when(mock.calculate()).thenReturn(1);
// test code

Code converted to Mockito:

try (MockedConstruction<FunctionsToMock> mocked = mockConstruction(FunctionsToMock.class, (mock, context) -> {
    when(mock.calculate()).thenReturn(1);
})) {
    // test code
}

Mockito static and constructor mocking limitations

The following cases are not supported by Mockito:

  • Private methods are not mockable by Mockito
  • The following classes are prevented from being static and constructor mocked to not interfere with Mockito internals:
    • java.lang.ClassLoader
    • java.lang.Thread
    • java.lang.Object
    • java.lang.System
    • java.util.Arrays
    • java.util.Locale
    • java.util.concurrent.ConcurrentHashMap
    • Abstract classes

Mockito also does not recommend static mocking any class of the JDK.

  • Mocking these classes will cause a stack overflow exception or other infinite loop:
    • java.io.File

What if a file cannot be tested because its name is inconsistent between the source control and the testing input?

To correctly process and analyze a file, Jtest must be able to match the file name you provided in the testing scope (i.e. the file name in your project) with the file name in the source control system. For this reason, if you are using a case-sensitive source control system, such a Git, you need to ensure that the file name capitalization is identical.

Reports

What if some characters fail to be properly displayed in Jtest reports?

Reports generated by Parasoft products require a sans-serif font to be available in your environment. If your report fails to correctly display some characters, such as national characters, ensure that a sans-serif font is installed on your system.

Working in the IDE

Why does test execution fail when the path to UTA files exceeds 250 characters?

On Windows, a file path longer than 250 characters may prevent accessing the file. If your workspace is deeply nested in the folder structure, the path to some UTA files may exceed 250 characters. If the files that are key to test execution cannot be accessed, test execution fails.

To ensure that the path to the UTA files does not exceed the limit, you may consider moving your workspace folder higher in the folder hierarchy.

What if the Jtest run configuration does not work in IntelliJ IDEA?

In rare cases, the Jtest run configuration may not work due to a known issue in some IntelliJ versions (see https://youtrack.jetbrains.com/issue/IDEA-223124 for details). If this happens, you need restart your IDE. The Jtest run configuration will be working after the restart.

What if the HTML content (Jtest's rule documentation, reports etc.) cannot be displayed on Ubuntu Linux?

When using latest Ubuntu Linux (21.10 or newer), with Snap-based Firefox browser as default, the Eclipse IDE may be unable to show HTML content correctly (see also: https://github.com/eclipse-platform/eclipse.platform.swt/issues/221). There are two workarounds:

  • Install a non-Snap version of Firefox (or other browser) and set it as a default system browser.
  • Configure Eclipse to use "external web browser" in Preferences> General> Web Browser> External web browsers.

Note: In order to configure Firefox as an "external web browser", use the following settings:
Location: /usr/bin/env
Parameters: firefox %URL%


  • No labels

Need assistance? Visit our support page