In this section:

Introduction

The Parasoft PCI DSS Compliance artifact is a set of assets for your DTP infrastructure that enable you to demonstrate compliance with PCI DSS coding requirements. The artifact is shipped as part of the Security Compliance PackContact your Parasoft representative to download and license the Security Compliance Pack. 

About PCI DSS

The Payment Card Industry Data Security Standard (PCI DSS) is a collection of coding requirements for software that processes payment card transactions. The standard is mandated by the card brands and administered by the Payment Card Industry Security Standards Council. Refer to the the PCI Security Standards Council website for details about the standard: https://www.pcisecuritystandards.org.

Parasoft facilitates PCI DSS standards by re-orienting code analysis checkers to report violations within the context of PCI DSS requirements. Each code analysis checker maps to one or more requirement, which appear in DTP widgets and reports.

Prerequisites

Code analysis data is required from one of the following Parasoft tools:

  • Parasoft dotTEST with appropriate Security Compliance Pack licenses.
  • Parasoft Jtest with appropriate Security Compliance Pack licenses.

See Security Compliance Pack for additional prerequisites information.

Process Overview

  1. Install the Security Compliance Pack into DTP Extension Designer.
  2. Deploy the PCI DSS Compliance artifact into your DTP environment. This also deploys the PCI DSS Compliance Assets.
  3. Analyze code using the PCI DSS test configuration and report violations to DTP. You can configure your Parasoft tool to use the local test configuration or the test configuration shipped with the Security Compliance Pack.
  4. Add the PCI DSS Compliance dashboard and widgets to your DTP interface. The dashboard widgets and shows the reported violations within the context of PCI DSS guidelines.
  5. Interact with the widgets and reports to identify code that needs to be fixed to achieve your compliance goals.

Achieving 100% Compliance

DTP will report 100% compliance against PCI DSS guidelines from requirement 6.2.4 that are mapped to a Parasoft static analysis rule.

PCI DSS Compliance Assets

The following artifacts are included in the package and added to your DTP environment when you install the Security Compliance Pack.

PCI DSS Compliance.json 

This file is the custom logic flow for Extension Designer. Installing the Security Compliance Pack adds the flow to the Extension Designer library. You can then add the flow to a service and deploy it to your DTP infrastructure.   

Dashboard Templates

Dashboard templates include preconfigured widgets to help you quickly view specific information about your projects. Refer the Dashboards section to learn more about dashboards in DTP. See Adding the PCI DSS Dashboards for details about viewing the widgets that appear in the dashboard templates.

  • PCI-DSS-dotNET.json
  • PCI-DSS-Java.json

Compliance Categories

Individual code analysis rules belong to a category, such as Security, Exceptions, etc. The PCI DSS Compliance artifact includes files that map code analysis rules to PCI DSS-specific categories. You can configure widgets to report violations according to the categories defined in the following files to view them according to their PCI DSS category:  

  • PCI-DSS-dotNET.xml
  • PCI-DSS-Java.xml

Test Configurations

You can configure your tool to run either the test configurations it ships with or the test configurations installed with the Security Compliance Pack. Refer to your tool's documentation for details. The following test configurations are included in the compliance pack:

  • PCI DSS 4.0

Models and Profiles

Profiles provide a range of functions in a DTP infrastructure, such as providing inputs for custom calculations executed by an extension and providing data for compliance reports. Profiles take their structure from models, which define fields, headers, or other components used in the profile. See Working with Model Profiles for information about understanding profiles in DTP Enterprise Pack.

The following profile files are included with the artifact:

  • pci-dss-java.json
  • pci-dss-dotnet.json
  • pci-dss-compliance.model.json

Cross-reference PDFs

For your convenience, PDFs that show the association between Parasoft rules and PCI DSS requirements are located in the <PACK>/rules/jtest and <PACK>/rules/dottest directories:  

  • PCI_DSS_4.0.pdf

Deploying the PCI DSS Compliance Assets

The PCI DSS Compliance assets are installed as part of the Security Compliance Pack installation (see Installation for instructions). After installing the artifact, you must deploy the assets to your DTP environment.

  1. Choose Extension Designer from the DTP settings (gear icon) menu.
  2. Click the Services tab and expand the DTP Workflows service category. You can deploy assets under any service category you wish, but we recommend using the DTP Workflows category to match how Parasoft categorizes the assets. You can also click Add Category to create your own service category (see Working with Services for additional information).
     
  3. You can deploy the artifact to an existing service or add a new service. The number of artifacts deployed to a service affects the overall performance. See Extension Designer Best Practices for additional information. Choose an existing service and continue to step 5 or click Add Service.
  4. Specify a name for the service and click Confirm.
  5. The tabbed interface helps you keep artifacts organized within the service. Organizing your artifacts across one or more tabs does not affect the performance of the system. Click on a tab (or click the + button to add a new tab) and choose Import from the vertical ellipses menu.
  6. Choose Local> Flows> Workflows> Security> PCI DSS Compliance and click Import.
  7. Click anywhere in the open area to drop the the artifact into the service.
  8. Click Deploy to finish deploying the artifact to your DTP environment. 
  9. Return to DTP and refresh your dashboard.

You will now be able to add PCI DSS widgets.

Adding the PCI DSS Dashboards

The PCI DSS dashboard templates for Java and .NET enable you to quickly add a set of preconfigured widgets that monitor PCI DSS compliance. See Dashboard Templates for a list of the templates included with the artifact. 

The dashboard template are deployed to your DTP environment as part of the Security Compliance Pack installation. If you do not see the dashboard template, restart DTP Services (see Stopping DTP Services and Starting DTP Applications).

  1. Click Add Dashboard from the DTP toolbar and specify a name when prompted.
  2. (Optional) You can configure the default view for the dashboard by specifying the following information:
    1. Choose the filter associated with your project in the filter drop-down menu. A filter represents a set of run configurations that enabled custom views of the data stored in DTP. See DTP Concepts for additional information.
    2. Specify a range of time from the Period drop-down menu. 
    3. Specify a range of builds from the Baseline Build and Target Build drop-down menus.  
  3. Enable the Create dashboard from a template option and choose either the PCI DSS - .NET or Java template from the drop-down menu.
     
  4. Click Create to finish adding the dashboard.

Manually Adding PCI DSS Widgets to an Existing Dashboard 

You can add the PCI DSS widgets shipped with the artifact to an an existing dashboard. See Adding Widgets for general instructions on adding widgets to a dashboard. After deploying the artifact, the PCI DSS widgets will appear in the PCI DSS category in the Add Widget overlay:

The following configurations are available:

TitleEnter a new title to replace the default title that appears on the dashboard.
FilterChoose a specific filter or Dashboard Settings from the drop-down menu. See Creating and Managing Filters for additional information.
Target BuildChoose a specific build from the drop-down menu. The build selected for the entire dashboard is selected by default. See Using Build Administration for additional information about understanding builds. 
Compliance ProfileSpecify a compliance profile (see Profile Configuration). The compliance profile data is used in compliance reports.

PCI DSS Compliance Widgets

See Dashboard Templates for a list of the dashboard templates shipped with the compliance artifact. The following widgets are included on one or more the dashboards:

PCI DSS Compliance Status

This widget shows the current state of compliance with PCI DSS.

There are seven possible states:

  • No rules enabled: Code analysis has not been reported to DTP or the test configuration was not executed.
  • N/A: The assets have not been deployed to a service or the service is not running. See Deploying the PCI DSS Compliance Assets 
  • Compliant with Deviations: Any violations reported are acceptable and have been suppressed. See Deviations Report for additional information about deviations/suppressions.
  • Compliant with Violations: Any violations reported do not represent a significant risk.
  • Compliant: No violations are reported and no suppressions have been applied. 
  • Not Compliant: Violations have been reported that represent a significant risk. 
  • Missing rule(s) in analysis: Parasoft code analysis rules documented in the profile were not included in the specified build. Make sure all rules are enabled in Jtest or dotTEST and re-run analysis.

Click on the widget to open the PCI DSS Compliance Report

PCI DSS Compliance Percentage

This widget shows the percentage of the code that is in compliance with PCI DSS guidelines. Click on the widget to open the PCI DSS Compliance Report.

PCI DSS Compliance - Requirements by Status

This widget shows represents the PCI DSS requirements as a pie chart. The red segment represents the requirements that the analyzed code is not currently complying with. The green segment represents the requirements that the analyzed code is currently complying with. The widget also shows the number of violations and deviations.

You can perform the following actions:

Rules in Compliance

This widget is an implementation of the native DTP Rules in Compliance widget. It shows the percentage of Parasoft rules that are mapped to PCI DSS requirements that are not reporting a violation (are in compliance). See Rules in Compliance - Summary for details about the widget. 

Categories - Top 5 Table

The dashboard includes an instance of the native Categories - Top 5 Table widget configured for PCI DSS. It shows the five PCI DSS categories with the most violations. See Categories - Top 5 Table for details about the widget.

Rules - Top 5 Table

The dashboard includes an instance of the native Rules - Top 5 Table widget configured for PCI DSS. It shows the five Parasoft rules mapped to PCI DSS categories with the most violations. See Rules - Top 5 Table for details about the widget.

Violations by Requirement - Treemap

This widget shows the violations grouped by PCI DSS requirement in a tree map. Each tile is assigned a color and represents a requirement from the guidelines. See Configuring Security Compliance Pack Widgets for details on how to configure this widget.

Viewing the PCI DSS Compliance Report

The main PCI DSS compliance report provides details about your compliance status and serves as the primary document for demonstrating compliance. 

You can perform the following actions:

Requirement Enforcement Plan

The Requirement Enforcement Plan shows which static analysis rules are used to enforce the PCI DSS requirements. It is intended to describe how you are enforcing each requirement. This report uses the data specified in the compliance profile (see Profile Configuration). In the profile, you can configure the values associated with each weakness property to better reflect the specific challenges associated with your project.  


Deviations Report

Your code can contain violations and still be PCI DSS-compliant as long as the deviations from the standard are documented and that the safety of the software is unaffected. Deviations are code analysis rules that have been suppressed either directly in the code or in the DTP Violations Explorer. See the dotTEST and Jtest documentation for details on suppressing violations in the code. See Suppressing Violations in the Violations Explorer documentation for information about suppressing violations in DTP.

Click on the Deviations Report link in the PCI DSS Compliance report to open the Deviations Report.

The Deviations Report shows all requirement IDs and headers, but requirements that have been suppressed will show additional information. You can perform the following actions:

  • Enable the Only Deviations option to only show deviations
  • Enable the Hide Modification History option to exclude the modification history for deviations

Build Audit Report

The Build Audit Report shows an overview of code analysis violations, as well as test results and coverage information, associated with the build. This report also allows you to download an archive of the data, which is an artifact you can use to demonstrate compliance with PCI DSS during a regulatory audit.

In order to download an archive, the build has to be locked. See Build Audit Report for additional details about this report.  

Profile Configuration

Models and profiles are assets that enable DTP Enterprise Pack to perform custom calculations and data processing tasks. The model defines the attributes to be used in the calculations and acts as the template for a profile. See Working with Model Profiles to learn more about models and profiles. 

The PCI DSS Compliance artifact ships with a default model and profile for code analysis results from Parasoft dotTEST and Jtest. Each profile contains categorization information for mapping Parasoft rules to PCI DSS requirements.  

The profile includes information necessary for generating compliance reports, as well as displaying data in the widgets shipped with the PCI DSS artifact. You can modify the profile if you want to re-categorize guidelines to meet your specific goals or specify additional metadata for your reports. Changes will be reflected in the Requirement Enforcement Plan.

We recommend creating a copy of the default profile and modifying the copy:

  1. Click Export Profile to download a copy.
  2. Rename the copy and click Import Profile.
  3. Browse for the copy and confirm to upload.
  4. Click Edit and make your changes. 
  5. Click Save.

You will be able to choose an alternate profile when configuring the widgets shipped with the PCI DSS artifact.

  • No labels