This topic explains how to configure reporting settings. Reporting settings can be configured in the GUI or from the command line interface (using localsettings).
Sections include:
From the GUI
The available GUI controls can be used to specify reporting settings for all tests—whether they are run from the command-line interface or the UI.
Before configuring report settings, you should review the settings on the following preference pages to ensure that the task authorship is being calculated correctly, results are being sent to the configured DTP server (or Team Server), the correct email host is used, and so on:
- DTP
- License
- Scope and Authorship
- Source Control
- Team Server
The settings specified in the UI can be fully or partially overwritten by those specified via localsettings.
To specify reporting settings from the GUI:
- Choose Parasoft> Preferences. The Preferences dialog will open.
- Select Parasoft> Reports.
- Specify the appropriate settings. Available settings are described in Report Configuration Settings below.
- If you have not already configured e-mail settings (sender address, host name, etc.) in either the GUI or from the command line, do so now in Parasoft> E-mail.
- Select Parasoft> Reports> E-mail Notifications.
- Specify the appropriate e-mail notification settings. Available settings include:
- Send reports by e-mail: Specifies whether reports are sent via e-mail.
- E-mail subject: Specifies the subject for e-mails containing reports.Specifies the subject line of the emails sent. The default subject line is "[Product Name] Report." For example, if you want to change the subject line to "Functional Testing Report for Project A", you would enter
Functional Report for Project A - Send manager reports to: Specifies where to send manager reports. You can enter a single address or a semicolon-separated list.
- Send reports without tasks: Specifies whether reports are sent when zero tasks are reported. You can enter a single address or a semicolon-separated list.
- Send developer reports to: Specifies where to send developer reports. You can enter a single address or a semicolon-separated list.
- Send ’Unknown’ developer reports to: Specifies where to send developer reports for tasks assigned to "unknown" (tasks that could not be traced back to a specific developer). These reports can be sent to only one user / address. A semicolon-separated list of addresses is not valid.
Report Configuration Settings
Reports Content
| Setting | Description |
|---|---|
| Detailed report for developers | Determines whether customized, detailed reports are generated for each team member (in addition to a summary report for managers). These reports contain only the tasks assigned to that specific team member. |
| Overview of tasks by authors | Determines whether the report includes an overview of the number and type of tasks assigned to each developer. |
| Overview of checked files and executed tests | Specifies whether the report provides details about all checked files and executed tests. For static analysis, this results in a list of all the files that were checked. For each file, it lists the number of rule violations and the number of suppressed violations. If the file has a violation, it also lists the line number, rule name, and rule ID for that violation. For test execution, this results in a list of all executed test cases and their outcomes (pass or fail). For each test suite, it lists the total number of test cases and the number of passed test cases. If a task is reported for a test case, additional details (stack trace, outcome, etc.) are presented. |
| Task details | Determines whether the report includes details about all of the reported tasks. |
| Test case details | Determines whether the report includes details about all executed test cases. |
| Suppression details | Specifies whether the report lists suppressed messages. |
| Requirement/defect details | Specifies whether the report shows requirements, defects, tasks, and feature requests that are associated with a test. |
| Active static analysis rules | Determines whether the report lists the static analysis rules that were enabled for the test. |
| Only tests that failed | Specifies whether the report lists only tests that failed. |
| Generate formatted reports in command-line mode | Determines whether formatted reports are generated for tests run in command line mode. |
| Cutoff date for graphs | Specifies the start date for trend graphs that track different categories of tasks over a period of time. |
HTML Report Hyperlinks for Requirement/Defect Details
If you are specifying a URL for the artifact (e.g., as a C/C++test test property), that URL will be available as a hyperlink in HTML reports.
If want to create hyperlinks and you are specifying artifact associations using only the artifact ID as specified in Change-based Testing and Traceability, you can use local properties to specify how the ID maps to a URL.
For example:
- report.assoc.url.pr=https://bugzilla.parasoft.com/show_bug.cgi?id=[%ID%]
- report.assoc.url.jira=https://jira.parasoft.com/browse/[%ID%]
- report.assoc.url.fr=https://bugzilla.parasoft.com/show_bug.cgi?id=[%ID%]
- report.assoc.url.task=http://concerto.parasoft.com.pl:8080/grs/jsf/planning/task/edit_task.jsf?entityId=[%ID%]
Report Format
| Setting | Description |
|---|---|
| Format | Specifies the desired report format:
|
| XSL file | If you chose custom XSL as the report format, specify the path to the XSL file that defines your custom format. |
| Report file extension | If you want to use a file extension other than the default .html extension, specify that extension here. |
| Generate additional archive with entire report content | Enable this option to generate an additional compressed archive (.zip) file in the specified report location. The ZIP file contains all the files generated to build the report. This option can generate an archive for any report format (e.g., HTML, CSV, PDF, etc.). By generating an archive, you can also perform custom transformations of the report because all of the elements are generated to the specified destination folder. |
Advanced Settings
| Setting | Description |
|---|---|
| Add absolute file paths to XML data | Specifies whether absolute file paths are added to XML data. This needs to be enabled on the Server installation if you want to relocate tasks upon import to desktop installations (as described in Relocating Tasks During Import: Requirements and Limitations). |
| Add metric details to XML data: | Specifies whether type-level and method-level metrics details are added to the XML report (in addition to project and package/namespace-level details, which are included by default). Metrics details will be shown in HTML and PDF reports. |
| Session tag | Specifies a tag for this report. This value is used for uploading summary results to Team Server. The results from each of the team’s regular test runs should have a unique tag. Variables can be used as described in Using Preference Settings for Command-Line Execution. For instance, if your team runs static analysis, and unit testing, you might use the session tags Static or Execution. Or, you might use variables such as session.tag=${config_name} or session.tag=${analysis_type} |
From localsettings
Reporting options can be specified in localsettings (e.g. for sharing team-wide settings via DTP or specifying options at the command line). See Configuring Localsettings for details.
Support for Custom Report Formats
You can customize locally-generated and emailed reports by building a custom XSL transformer that specifies how you want the results formatted. For instance, you could use a custom transformer to map data into the format you need to demonstrate compliance to an internal security policy.
To specify a custom report format, you need to:
- Create an XSL file that specifies how you want to transform the XML data.
- In the Preferences panel’s Reports page, specify the location of this XSL file, as well as the extension that should be assigned to the resulting file.
Alternatively, you can specify this information in a localsettings file via the settings
(results.)report.custom.extension and (results.)report.custom.xsl.file.
Available Parameters
The following parameters can be used in custom XSL files:
| Parameter | Notes |
|---|---|
| report_type=disk_report|email_report | Determines if the generated report will be sent by email or saved on the local disk drive. |
| test_params | The command line that was used to start the product that generated this report. Example: cpptestcli: -config team://xtest-static.properties -localsettings /home/nightly/localsettings.properties -publish -report /home/nightly/reports/report.html -resource myproject -dtp.autoconfig [email protected]:8080 |
| test_config_name | The name of the Test Configuration that was executed to produce this report. |
| output_dir=[dir] | The directory where the report is created. This can be used to generate developer reports. Example: <xsl:value-of select="concat($output_dir,$dev_reports_prefix,$authid,'.csv')"/> |
| rules_dir_path=[path] | The directory where rules documentation is saved. This can be used to generate rule popups/links. Example: <xsl:value-of select="concat('javascript:openWin(',$qt,$rules_dir_path,$id,'.html',$qt,')')"/> |
| suppr_msgs=true|false | The value of the "Suppressions details" option. See Report Configuration Settings for details. |
| dev_errors=true|false | The value of the "Task details" option. See Report Configuration Settings for details. |
| dev_reports=true|false | The value of the "Detailed report for developers" option. See Report Configuration Settings for details. |
| show_active_rules=true|false | The value of the "Active static analysis rules" option. See Report Configuration Settings for details. |
| associations=true|false | The value of the "Requirement/defect details" option. See Report Configuration Settings for details. |
| dev_reports_prefix=[prefix] | The prefix used to name developer reports. Example: <xsl:value-of select="concat($output_dir,$dev_reports_prefix,$authid,'.csv')"/> |
| exec_cvg_details=true|false | The value of the "Detailed report for" option. See Report Configuration Settings for details. |
| attachments=true|false | The value of the localsettings key report.mail.attachments. See Configuring Localsettings for details. |
| test_cases_details=true|false | The value of the "Test case details" option. See Report Configuration Settings for details. |
| failed_tests_only=true|false | The value of localsettings key report.failed_tests_only. See Configuring Localsettings for details. |
| authors_details=true|false | The value of the "Overview of tasks by authors" option. See Report Configuration Settings for details. |
| contexts_details=true|false | The value of the "Overview of checked files and executed tests" option. See Report Configuration Settings for details. |
Samples
For additional guidance, see the following files:
Local Reports
- XML Schema: reports.xsd
- Sample XML with a variety of results: rep_example.xml
- Note that this report is used by all transformations below
- Sample transformation to a plain text CSV file
- XSL file: csv.xsl
- result: csv.txt
- Sample transformation to an HTML table with a violations list
- XSL file: html_table.xsl
- result: html_table.html
- Sample transformation to an HTML table with author/violations statistics
- XSL file: stats_table.xsl
- result: stats_table.html
- Sample developer report transformation to a CSV file
- XSL file: csv_dev.xsl
- result: csv_dev.csv
- Sample developer report transformation to an HTML file
- XSL file: html_dev.xsl
- result: html_dev.html
