Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Published by Scroll Versions from space FUNCTDEV and version SVC2024.1

This topic explains how to configure and apply the XML Signer tool in SOAtest and Virtualize. This tool signs XML documents for security purposes.

Sections include:

Table of Contents
maxLevel1

Understanding XML Signature

In order to securely send data across the Internet during a Web service transaction, security standards must be put in place to ensure that the different users taking part in the transaction can identify each other. The XML Signature standard recommended by the W3C defines a process that allows any data in XML documents to be digitally signed. With XML Signature, Web service users can verify the identity of others involved in a transaction and can be ensured that the data has not been altered since the document was signed. OASIS leverages this standard so that it can be used in SOAP.

Configuring the XML Signer Tool

The XML Signer Tool supports the W3C XML Signature standard and allows you to digitally sign data to be sent as Web service transactions. The XML Signer Tool also allows you to sign individual elements of the XML document, or the entire document itself. This feature is especially useful for Web service transactions that are performed between multiple partners or endpoints. For example, a transaction for the purchase of a car may take place through a Web service. In this instance, the buyer would have to sign certain parts of the document, the loan officer may have to sign certain parts of the document, and the seller would have to sign certain parts of the document.

Tool Settings

The following options display in the left pane of the Tool Settings tab:

Table of Contents
maxLevel2
minLevel2

General Settings

The following options are available in the General tab:

Scroll Table Layout
widths30%,70%

Key Store

Select the Key Store used to verify your identity and to sign the XML data from the Key Store menu. The Key Stores available in this menu are dependent on the Key Stores you added at the test or Responder suite level.For more information on adding Key Stores, see Adding Global Key Stores in SOAtest and Adding Global Key Stores in Virtualize.

AlgorithmSpecifies the unique algorithm used for defining the certificate keys.
Digest methodChoose a message digest algorithm for signing the data.
Canonical formSpecifies the algorithm used to create a canonicalized form of the information being signed.
KeyInfo form

KeyInfo is an optional element within the signature; it contains public key information needed to validate the signature. It is only applicable when performing an enveloped signature on POX or SAML (with WS-Security mode off). Select which options should be included within the KeyInfo element. The following options are available:

  • X509 Certificate: Includes a X509Data/X509Certificate element containing the base64-encoded certificate. This is the recommended default.
  • X509 IssuerSerial: Includes a X509Data/X509IssuerSerial element containing the X.509 name/serial number pair.
  • X509 SKI: Includes a X509Data/X509SKI element containing the base64 encoded subject key identifier. The certificate must be X.509 version 3.
  • X509SubjectName: Includes a X509Data/X509SubjectName element containing the X.509 subject name.
  • Public KeyValue: Includes a KeyValue/RSAKeyValue element containing the base64-encoded public key.
  • STR X509 Certificate: Includes a wsse:SecurityTokenReference/wsse:KeyIdentifier element containing the base64-encoded certificate.
  • STR X509 SKI:  Includes a wsse:SecurityTokenReference/wsse:KeyIdentifier element containing the base64 encoded subject key identifier.
WS-Security mode

Enables signing SOAP messages according to OASIS WS-Security. By default, the content of the entire SOAP body will be automatically signed as configured in the Target Elements Settings. When this mode is disabled, an enveloped signature is performed on target elements.

Choose a setting from the Security header layout menu to specify which layout rules to apply when adding items to the WS-Security header. The following settings are available:

  • Lax: Items are added to the security header in any order that conforms to WSS: SOAP Message Security.
  • LaxTimestampFirst: Same as Lax, except that the first item in the security header MUST be a wsse:Timestamp.
  • LaxTimestampLast: Same as Lax, except that the last item in the security header MUST be a wsse:Timestamp.
  • Strict: Items are added to the security header following the numbered layout rules described below according to a general principle of 'declare before use'.

Enable Sign security token using STR Dereference Transform (STRDT) to automatically include the security token in the signature by referencing a security token reference (STR) using the STR Dereference Transform (STRDT) algorithm. By default, the signature will reference the STR that is automatically generated in the signature under the KeyInfo element. If a different STR should be referenced, such as an STR from the Security header, then include the STR in the Target Elements configuration.

Perform SAML signature

Enable this option to sign a SOAP message based on the OASIS SAML Token profile or to perform an enveloped signature on a SAML assertion.

If the WS-Security mode option is disabled, an enveloped SAML signature will be formed on the SAML assertions selected under Target Elements Settings. SAML assertions using the holder-of-key confirmation method should typically have an enveloped signature.

If the WS-Security mode option is enabled, the SOAP envelope will be signed based on the OASIS SAML Token profile.

User Key Store

Enable this option to reference the requester's keystore. This option is only applicable for SAML assertions using the holder-of-key confirmation method. This option should be disabled when the assertion does not have an enveloped signature, which is typical for sender-vouches confirmation.

If the WS-Security mode is disabled, the keystore can optionally be used to add the user's public KeyInfo into the assertion's subject confirmation before performing an enveloped signature on the SAML assertion. This is applicable for the holder-of-key scenario where the assertion holds the user's key and is signed by the assertion issuer.

If the WS-Security mode is enabled, the following requirements must be met in order for the signature on the SOAP message to be successful:

    1. The holder-of-key assertion must hold the user's certificate referenced by this keystore. 
    2. The assertion in the SOAP header must already have an enveloped signature.

You can chain two XML Signers together to facilitate holder-of-key confirmation. Configure the first signer to add the public KeyInfo to the assertion's subject confirmation, then perform an enveloped signature on the assertion with the WSS mode off. Next, the second signer can sign the SOAP envelope containing the SAML assertion based on the OASIS SAML token profile with the WSS mode on.

WS-Security Settings

The following options are available in the WS-Security tab:

Scroll Table Layout
widths30%,70%

FormChoose the appropriate form to specify the key and certificate used for encryption.
ActorEnter a value to specify a SOAP actor.
Add must Understand=1Specifies whether or not the receiver must recognize and verify the signature of the message. If this option is enabled, a SOAP fault will be sent back if the receiver does not know how to process the signature header.
Add Timestamp

Enable this option to add a timestamp to the message. The following settings are available:

  • Enable Sign timestamp to provide a digital signature with the timestamp.
  • Enable Add expiration to enter an expiration value.

Target Elements Settings

Enable SOAP body/entire document to sign the entire SOAP body or entire XML document.

To specify an XPath and sign a specific element within the XML document:

  1. Disable SOAP body/entire document and click the Tree tab.
  2. Choose an element and click Extract. A row will appear in the Selected Element list.
  3. Click Modify to make any changes to the XPath expression you want to sign. The following extraction options are available:
    1. Entire element will sign the entire XPath.
    2. Content Only will sign only the text content.
  4. Click Evaluate XPath to verify your changes.
  5. Click OK.

Input Type Tab

The Input Type tab is only available if the XML Signer tool is added as a standalone tool and not chained to another tool. The following options are available from the Input Type tab:

  • Text: Use this option if you want to type or copy the XML document into the UI. Select the appropriate MIME type, enter the XML in the text field below the Text option.
  • File: Use this option if you want to use an existing file. Click Browse to choose a file.
    • Enable Persist as Relative Path if you want the path to this file to be saved as a path that is relative to the current configuration file. Enabling this option makes it easier to share tools across multiple machines. If this option is not enabled, the test or Responder will save the path to this file as an absolute path.

Usage Notes

You can use the XML Signer tool as a standalone tool at the tool level by right-clicking the main test suite node and selecting Add New > Test, then selecting XML Signer from the dialog that opens. You can also chain the XML Signer tool to a messaging tool by right-clicking the desired tool node and selecting Add Output, then selecting XML Signer from the dialog that opens.You can chain the XML Signer tool to a messaging tool by right-clicking the desired tool node and selecting Add Output, then selecting XML Signer from the dialog that opens. The messaging tool will use the transformed XML.

You can chain the XML Signer tool and the XML Encryption tool to a messaging tool to perform both encryption and XML signature on a SOAP message. For more information on the XML Encryption tool, seeXML Encryption.

You can also chain any tool, such as an Edit or Browse tool, to the XML Signer Tool by right-clicking the desired XML Signer Tool node and selecting Add Output, then selecting XML Signer from the dialog that opens.

Info
titleUnlimited Strength Java Cryptography Extension
In order to perform security operations using the XML Signature Verifier, XML Signer, or XML Encryption tools, or if using Key Stores, you will need to download and install the Unlimited Strength Java Cryptography Extension. For details, see JCE Prerequisite.

Related Tutorials

The following tutorial lesson demonstrates how to use this tool: