...

• cert-compliance.json: This model file describes how the CERT C and CERT C++ profiles render the data. 
• cert-cpp.json: This is the default profile that renders data according to the cert-compliance.json model. This profile should be enabled to generate compliance audit reports.
• cert-cpp-likelihood.json: This profile provides metric information for key performance indicator (KPI) calculations. It renders data according to the KPI.json model.
• cert-cpp-remediation-cost.json: This profile provides metric information for KPI calculations. It renders data according to the KPI.json model.

KPI.json

This profile extends the Key Performance Indicator artifact so that metrics widgets can show metrics information related to CERT C++ guidelines. The profile renders the data calculated by the cert-cpp-likelihood.json and cert-cpp-remediation-cost.json profiles.

Cross-reference PDF

For your convenience, a PDF that shows the association between Parasoft rules and CERT guidelines is located in the <PACK>/rules/cpptest directory.  

package.json

This file describes the contents of the extension.

...

Cross-reference PDF

For your convenience, a PDF that shows the association between Parasoft rules and CERT guidelines is located in the <PACK>/rules/cpptest directory.  

package.json

This file describes the contents of the extension.

Anchor
Deploying the CERT C++ Compliance Assets Deploying the CERT C++ Compliance Assets

Deploying the CERT C++ Compliance Assets

The CERT C++ Compliance files are installed as part of the Security Compliance Pack (see Installation for instructions). After installing the artifact, you must deploy the assets to your DTP environment. 

1. Choose Extension Designer from the DTP settings (gear icon) menu.
2. Click the Services tab and expand the DTP Workflows services category. You can deploy assets under any service category you wish, but we recommend using the DTP Workflows category to match how Parasoft categorizes the assets. You can also click Add Category to create your own service category (see Working with Services for additional information).
   Image Added 
3. You can deploy the artifact to an existing service or add a new service. The number of artifacts deployed to a service affects the overall performance. See Extension Designer Best Practices for additional information. Choose an existing service and continue to step 5 or click Add Service. 
4. Specify a name for the service and click Confirm.
5. The tabbed interface helps you keep artifacts organized within the service. Organizing your artifacts across one or more tabs does not affect the performance of the system. Click on a tab (or click the + icon to add a new tab) and choose Import the vertical ellipses menu.
6. Choose Local > Flows > Workflows > Security > CERT Compliance and click Import.
7. Click anywhere in the open area to drop the artifact into the service. 
8. Click Deploy and return to your DTP dashboard.
9. Refresh your browser.

You can now add the CERT C++ Compliance dashboard and widgets. 

Anchor
Adding the CERT C++ Compliance Dashboard Adding the CERT C++ Compliance Dashboard

Adding the CERT C++ Compliance Dashboard

The CERT C++ dashboard template will be available after installing the Security Compliance Pack. If you do not see dashboard template, restart DTP (see Stopping DTP Services and Starting DTP Applications).   

1. Click Add Dashboard in the DTP toolbar and specify a name when prompted. 
2. (Optional) You can configure the default view for the dashboard by specifying the following information:
   1. Choose the filter associated with your project in the filter menu. A filter represents a set of run configurations that enabled custom views of the data stored in DTP. See DTP Concepts for additional information.
   2. Specify a range of time from the Period menu. 
   3. Specify a range of builds from the Baseline Build and Target Build menus. 
   Image Added
3. Enable Create dashboard from a template and choose the SEI CERT C++ Compliance template from the associated menu.
4. Click Create to finish adding the dashboard.

If you have already executed C/C++test on your project using the SEI CERT C++ test configuration, most widgets will render data as soon as the dashboard is added. You can immediately begin using these widgets and working with the data to help you track your compliance goals (see CERT C++ Compliance Widgets).

Anchor
Manually Adding the CERT C++ Widgets Manually Adding the CERT C++ Widgets

Manually Adding the CERT C++ Widgets

You can manually add the CERT C++ widgets to an existing dashboard. See Adding Widgets for general instructions on how to add widgets to a dashboard. After deploying the artifact, widgets will appear in the SEI CERT category.  

Image Added

The following configurations are available:

The CERT C++ Compliance files are installed as part of the Security Compliance Pack (see Installation for instructions). After installing the artifact, you must deploy the assets to your DTP environment. 

1. Choose Extension Designer from the DTP settings (gear icon) menu.
2. Click the Services tab and expand the DTP Workflows services category. You can deploy assets under any service category you wish, but we recommend using the DTP Workflows category to match how Parasoft categorizes the assets. You can also click Add Category to create your own service category (see Working with Services for additional information).
   Image Removed 
3. You can deploy the artifact to an existing service or add a new service. The number of artifacts deployed to a service affects the overall performance. See Extension Designer Best Practices for additional information. Choose an existing service and continue to step 5 or click Add Service. 
4. Specify a name for the service and click Confirm.
5. The tabbed interface helps you keep artifacts organized within the service. Organizing your artifacts across one or more tabs does not affect the performance of the system. Click on a tab (or click the + icon to add a new tab) and choose Import the vertical ellipses menu.
6. Choose Local > Flows > Workflows > Security > CERT Compliance and click Import.
7. Click anywhere in the open area to drop the artifact into the service. 
8. Click Deploy and return to your DTP dashboard.
9. Refresh your browser.

You can now add the CERT C++ Compliance dashboard and widgets. 

...

The CERT C++ dashboard template will be available after installing the Security Compliance Pack. If you do not see dashboard template, restart DTP (see Stopping DTP Services and Starting DTP Applications).   

1. Click Add Dashboard in the DTP toolbar and specify a name when prompted. 
2. (Optional) You can configure the default view for the dashboard by specifying the following information:
   1. Choose the filter associated with your project in the filter menu. A filter represents a set of run configurations that enabled custom views of the data stored in DTP. See DTP Concepts for additional information.
   2. Specify a range of time from the Period menu. 
   3. Specify a range of builds from the Baseline Build and Target Build menus. 
   Image Removed
3. Enable Create dashboard from a template and choose the SEI CERT C++ Compliance template from the associated menu.
4. Click Create to finish adding the dashboard.

If you have already executed C/C++test on your project using the SEI CERT C++ test configuration, most widgets will render data as soon as the dashboard is added. You can immediately begin using these widgets and working with the data to help you track your compliance goals (see CERT C++ Compliance Widgets). Additional steps, however, are necessary to use the Remediation Cost and Likelihood Score widgets, which rely on calculations executed by the KPI extension. See Enabling the CERT KPI Widgets for instructions.

...

You can manually add the CERT C++ widgets to an existing dashboard. See Adding Widgets for general instructions on how to add widgets to a dashboard. After deploying the artifact, widgets will appear in the SEI CERT category.  

Image Removed

The following configurations are available:

Anchor

...

CERT C++ Compliance Widgets

...

CERT C++ Compliance Widgets

...

The Remediation Cost and Likelihood Score widgets are implementations of native Metrics - Summary DTP widgets configured to present CERT-specific metrics data. The KPI extension performs custom calculations on the metrics data sent to DTP according to the SEI CERT C++ Remediation Cost and SEI CERT C++ Likelihood KPI profiles. The processed metrics are reported in the widgets. 

In order to use these widgets, you must deploy and execute the KPI extension. C/C++test must also be executed with the Metrics test configuration under the same build ID so that the build has both static analysis and metrics data. Refer to the C/C++test documentation for details about setting the build ID and executing the Metrics test configuration.  

1. Choose Extension Designer from the DTP settings (gear icon) menu and click the Services tab. 
2. Choose a service category and a service for the extension. We recommend deploying the KPI extension to the DTP Workflows category.
3. Open the vertical ellipses menu and choose Import > Local > Workflows > Security > Key Performance Indicator.
4. Click anywhere in the space to drop the flow into the service tab and click Deploy.
5. Click on the compliance category (DTP Workflows) and expand your service to expose the available endpoints.  
   Image Removed
6. Expand the Key Performance Indicator section and copy the endpoint. 
   Image Removed
7. Send a REST request to the endpoint along with the required parameters. You can execute the request in a browser, using a cURL command, or add it to a script. The following table describes the required parameters:

...

...

http://framemaker:8314/categories/5ae39f928550880f5026fc80?filterId=3&profile=SEI%20CERT%20C%2B%2B%20Likelihood

{
    {
        success: {
            title: "KPI",
            message: "Calculation has successfully started for filter 'docs' using profile 'SEI CERT C++ Likelihood'."
        }
    }
}

Metrics-related calculations are long-running processes and may take several minutes to execute depending on how much data you have to process. After the calculation completes, refresh the widgets (if already on your dashboard) to view the data. The KPI extension only needs to be deployed once, but you must invoke the API separately for each profile, such as SEI CERT C++ Likelihood and SEI CERT C++ Remediation Cost.

Image Removed

For additional views of the metrics, you can manually add instances of the native Metrics - Summary DTP widget to your dashboard and configure them to use the SEI CERT C++ Likelihood and SEI CERT C++ Remediation Cost metrics, as well as set the aggregation value.

Image Removed

You can click on a widget to open the Single Metric Overview Report. 

...

The following widgets are shipped with the CERT C++ Compliance DTP Workflow to help you achieve CERT C++ Compliance goals.

CERT Compliance - Status

This widget provides an overview of the project's CERT compliance status.  

Image Removed

By default, the widget shows Rules and Recommendations, as well as all priority levels. You can add multiple instances of the widget and configure different combinations to create robust views of the compliance status. Click on the widget to open the CERT C++ Compliance Report. 

CERT Levels - Target

This widget shows the highest concentration of static analysis violations per CERT category. It provides an overview of the compliance status, as well as applicable deviations, in the tooltip. Click on the widget to open the CERT C++ Compliance Report.

Image Removed

CERT Compliance - Status

The widget shows the overall compliance status, as well as the compliance status for each CERT level. You can add multiple instances of the widget configured to use a different profile, for example, a profile with disabled guidelines, to view your current compliance status. Click on the widget to open the CERT C++ Compliance Report.  

Image Removed

The code can be compliant with deviations and violations that have been deemed acceptable. See Deviation Report for additional information about deviations.

The status will be set to Not Compliant if Parasoft code analysis rules documented in your profile were not included in the specified build or if unacceptable violations have been reported. Make sure all rules are enabled in C/C++test and re-run analysis.

CERT Compliance - Percentage Widget

This widget shows the completeness of CERT compliance as a percentage. Completeness is based on the number of guidelines being enforced in the profile. The CERT C++ dashboard includes three instances of this widget, one for each level. Click on the widget to open the CERT C++ Compliance Report. 

Image Removed

CERT Compliance - Guidelines by Status

This widget shows the compliance status for a specific Rule or Recommendation per priority level.

Image Removed

You can add multiple instances of the widget configured to different type/priority level combinations to help you understand your compliance status from different perspectives. The pie chart can represent up to four different guideline statuses for the selected category:

...

Guidelines that your code is deviating from but are still considered compliant.

A deviation is when the guideline is not being followed according to the Parasoft static analysis rule but is considered acceptable because it does not affect the safety of the software. Deviations represent Parasoft static analysis rules that have been suppressed.

...

Guidelines that your code is considered compliant with, even though the static analysis rules that enforce them contain violations. Only Recommendations can have this status.

...

CERT C++ Compliance Widgets 

The following widgets are shipped with the CERT C++ Compliance DTP Workflow to help you achieve CERT C++ Compliance goals.

CERT Compliance - Status

This widget provides an overview of the project's CERT compliance status.  

Image Added

By default, the widget shows Rules and Recommendations, as well as all priority levels. You can add multiple instances of the widget and configure different combinations to create robust views of the compliance status. Click on the widget to open the CERT C++ Compliance Report. 

CERT Levels - Target

This widget shows the highest concentration of static analysis violations per CERT category. It provides an overview of the compliance status, as well as applicable deviations, in the tooltip. Click on the widget to open the CERT C++ Compliance Report.

Image Added

CERT Compliance - Status

The widget shows the overall compliance status, as well as the compliance status for each CERT level. You can add multiple instances of the widget configured to use a different profile, for example, a profile with disabled guidelines, to view your current compliance status. Click on the widget to open the CERT C++ Compliance Report.  

Image Added

The code can be compliant with deviations and violations that have been deemed acceptable. See Deviation Report for additional information about deviations.

The status will be set to Not Compliant if Parasoft code analysis rules documented in your profile were not included in the specified build or if unacceptable violations have been reported. Make sure all rules are enabled in C/C++test and re-run analysis.

CERT Compliance - Percentage Widget

This widget shows the completeness of CERT compliance as a percentage. Completeness is based on the number of guidelines being enforced in the profile. The CERT C++ dashboard includes three instances of this widget, one for each level. Click on the widget to open the CERT C++ Compliance Report. 

Image Added

CERT Compliance - Guidelines by Status

This widget shows the compliance status for a specific Rule or Recommendation per priority level.

Image Added

You can add multiple instances of the widget configured to different type/priority level combinations to help you understand your compliance status from different perspectives. The pie chart can represent up to four different guideline statuses for the selected category:

You can perform the following actions:

• Mouse over a pie slice to view details.
• Click a section to open the CERT C++ Compliance Report filtered by the type, priority, and compliance status.
• Click the number of violations counter to open the CERT C++ Compliance Report filtered by the type, priority, and compliance status.
• Click the number of deviations counter to open the Deviation Report filtered by the type and priority.

CERT Violations by Category - TreeMap Widget

This widget provides a representation of the highest concentration of static analysis violations per type and priority level. Tiles are color-coded according to the priority level:

• Red tiles represent L1 violations.
• Yellow tiles represent L2 violations.
• Green tiles represent L3 violations.

The Parasoft rule(s) enforcing violations are also presented. Tiles are proportional to the number of static analysis violations reported for each rule. 

Image Added  

The widget uses the hierarchy established in the model profile to correlate Parasoft rules with CERT rules, recommendations, and priorities. You can mouse over a tile in the widget to view the number of violations associated with each rule/guideline/category.

Click on a rule to see the violation in the Violations Explorer.

CERT Compliance by Priority

You can perform the following actions:

• Mouse over a pie slice to view details.
• Click a section to open the CERT C++ Compliance Report filtered by the type, priority, and compliance status.
• Click the number of violations counter to open the CERT C++ Compliance Report filtered by the type, priority, and compliance status.
• Click the number of deviations counter to open the Deviation Report filtered by the type and priority.

CERT Violations by Category - TreeMap Widget

This widget provides a representation of the highest concentration of static analysis violations per type and priority level. Tiles are color-coded according to the priority level:

• Red tiles represent L1 violations.
• Yellow tiles represent L2 violations.
• Green tiles represent L3 violations.

The Parasoft rule(s) enforcing violations are also presented. Tiles are proportional to the number of static analysis violations reported for each rule. 

Image Removed  

The widget uses the hierarchy established in the model profile to correlate Parasoft rules with CERT rules, recommendations, and priorities. You can mouse over a tile in the widget to view the number of violations associated with each rule/guideline/category.

Click on a rule to see the violation in the Violations Explorer.

CERT Compliance by Priority

This widget is an implementation of the standard Compliance By Category widget shipped with DTP. It shows the number and percentage of rules in compliance grouped by rule categories.

Image Removed

Click on an entry in the table to open the Violations by Compliance Category report.

Top 5 CERT Categories

This widget is an implementation of the standard Categories - Top 5 Table widget shipped with DTP. It shows the five CERT guideline categories with the most violations.

Image Removed

Click on a link in the Name column or the more... link to open the Violations by Compliance Category report.

Top 5 CERT Guidelines

This widget is an implementation of the standard Categories - Top 5 Table widget shipped with DTP. It shows the five CERT guidelines with the most violations.

Image Removed

Click on a link in the Name column or the more... link to open the Violations by Compliance Category report.

...

This widget is an implementation of the standard Rules in Compliance - Summary widget shipped withe DTP. This widget shows the following information:

• How many static analysis rules for the selected compliance standard were enabled during code analysis.
• How many violations were reported.
• The overall percentage of rules that did not report violations.
• The change in number of violations from the baseline build to the target build as a percentage (if applicable).

Image Removed

By Category widget shipped with DTP. It shows the number and percentage of rules in compliance grouped by rule categories.

Image Added

Click on an entry in the table to open the Click on the widget to open the Violations by Compliance Category report.

...

Top 5 CERT Categories

This widget is an implementation of the standard Categories - Top 5 Table widget shipped with DTP. It shows the five CERT guideline categories with the most violations.

Image Added

Click on a link in the Name column or the more... link to open the Violations by Compliance Category report.

Top 5 CERT Guidelines

This widget is an implementation of the standard Categories - Top 5 Table widget shipped with DTP. It shows the five CERT guidelines with the most violations.

Image Added

Click on a link in the Name column or the more... link to open the Violations by Compliance Category report.

CERT Analysis Compliance

This widget is an implementation of the standard Rules in Compliance - Summary widget shipped withe DTP. This widget shows the following information:

• How many static analysis rules for the selected compliance standard were enabled during code analysis.
• How many violations were reported.
• The overall percentage of rules that did not report violations.
• The change in number of violations from the baseline build to the target build as a percentage (if applicable).

Image Added

Click on the widget to open the Violations by Compliance Category report.

Anchor
CERT C++ Compliance Reports CERT C++ Compliance Reports

CERT C++ Compliance Reports

The CERT Compliance Report provides an overview of your CERT compliance status and serves as the primary document for demonstrating compliance.

Image Added

You can perform the following actions:

• Use the menus to sort by the following criteria:
  • Guideline type: Rule, Recommendation, or All 
  • Priority level: L1, L2, L3, or All
  • Compliance status: All, No Rules Enabled, Compliant, Compliant With Deviations, Compliant With Violations, Not Compliant, Missing Rule(s) in Analysis
• Click a link in the # of Violations to view the violations in the Violations Explorer.
• Click a link in the # of Deviations to view the suppressed violations in the Violations Explorer.
• Open one of the CERT Compliance sub-reports.
• Click Download PDF to download a printer-friendly PDF version of the report data. If you added a custom graphic to DTP as described in Adding a Custom Graphic to the Navigation Bar, the PDF will also be branded with the graphic. 

The CERT Compliance Report contains four supporting reports:

Profiles

The Security Compliance Pack includes a profile associated with the core CERT C++ workflow

...

The CERT Compliance Report provides an overview of your CERT compliance status and serves as the primary document for demonstrating compliance.

Image Removed

You can perform the following actions:

• Use the menus to sort by the following criteria:
  • Guideline type: Rule, Recommendation, or All 
  • Priority level: L1, L2, L3, or All
  • Compliance status: All, No Rules Enabled, Compliant, Compliant With Deviations, Compliant With Violations, Not Compliant, Missing Rule(s) in Analysis
• Click a link in the # of Violations to view the violations in the Violations Explorer.
• Click a link in the # of Deviations to view the suppressed violations in the Violations Explorer.
• Open one of the CERT Compliance sub-reports.
• Click Download PDF to download a printer-friendly PDF version of the report data. If you added a custom graphic to DTP as described in Adding a Custom Graphic to the Navigation Bar, the PDF will also be branded with the graphic. 

The CERT Compliance Report contains four supporting reports:

Profiles

The Security Compliance Pack includes a profile associated with the core CERT C++ workflow and a set of profiles associated with calculating the SEI CERT C++ Remediation Cost and SEI CERT C++ Likelihood KPI metrics. 

...

The CERT C++ Compliance DTP Workflow ships with a default profile that includes information necessary for generating CERT compliance reports. The default profile shows the correlation between CERT guidelines and Parasoft code analysis rules and is suitable for most normal use cases.

If necessary, you can make a copy of the default profile and adjust the correlation between Parasoft code analysis rules and CERT C++ guidelines to achieve your software quality and compliance goals. 

...

. 

Anchor
CERT C++

...

Compliance Profile CERT C++

...

Compliance Profile

CERT C++

...

Compliance Profile

The CERT C++ Compliance DTP Workflow ships with a default profile that includes information necessary for generating CERT compliance reports. The default profile shows the correlation between CERT guidelines and Parasoft code analysis rules and is suitable for most normal use cases.

If necessary, you can make a copy of the default profile and adjust the correlation between Parasoft code analysis rules and CERT C++ guidelines to achieve your software quality and compliance goals. 

...

The KPI artifact shipped with the Security Compliance Pack includes the SEI CERT C++ Likelihood and SEI CERT C++ Remediation Cost profiles. The profiles assign weights to the metrics analysis rules in order to calculate a KPI value for the build.

Image Removed

The default profile is suitable for most normal usage, but you can adjust the weights for each metrics rule if necessary.

1. Open Extension Designer and click the Model Profile tab.
2. Expand the KPI CERT Compliance model and choose either the SEI CERT C++ Likelihood or SEI CERT C++ Remediation profile. profile. 
3. Click Export Profile to Click Export Profile to download a copy. 
4. Rename the copy and click click Import Profile. 
5. Browse for the copy and confirm to upload.
6. Rename the profile and click click Edit.
7. Make your adjustments and click Save Save.