This topic explains how to modify the user actions simulated by a web scenario.
Sections include:
Table of Contents | ||
---|---|---|
|
User Actions Configuration Overview
To view and modify the action taken by a specific scenario step:
- Double-click the scenario step whose actions you want to configure.
- In the configuration panel that opens in the right side of the GUI, open the User Actions tab.
- Review the existing actions (initially, the ones captured during recording) and modify the settings as needed to specify the actions you want performed. You can choose from the available pre-set actions, or define a custom one.
Using Data Sources to Parameterize User Actions
You can use data sources to parameterize user actions. For instance, to have a "type" action iterate through a set of different values stored in an Excel spreadsheet.
Parameterizing Tests with Data Sources, Variables, or Values from Other Tests.
For details on how to add and use data sources to parameterize tests, seeIdentifying Elements Associated with User Actions
The element that is the source of a user action will be highlighted with a solid blue border in the scenario step’s Pre-Action Browser Contents tab.
Changing the Target of a User Action
To quickly change the target of a user action, right-click the related element in the Pre-Action Browser Contents tab and choose the appropriate Modify command.
If the user action that you want to change is not associated with a specific element (for instance, a "close" or "navigate" action), click the User Actions tab and choose a new action from the Action dropdown to modify the target.
Inspecting the HTML for Elements
As you create and modify user actions for page elements, you may want to inspect the HTML to determine if you are adding actions to the appropriate elements.
To see the HTML for an element, right-click the element and choose Inspect <Element>.
Understanding Preset Actions
You can configure most common user actions by selecting from the list of preset actions, then customizing them as needed to suit your needs. The available preset actions are described below.
User Actions Tab
The User Actions tab contains configuration settings for many preset user actions. Choose a user action from the Action dropdown and configure the element locator settings. See Specifying Specialized Element Locators for more information.
Element Locator Settings
The element locator settings allow you to specify the element associated with the action.
The following element locator options are available:
- Choose Use XPath and enter an XPath to be used as an identifier.
- Choose Use Script to enter a script that defines the desired user action.
- Choose Use Element Properties to specify a set of properties for associating an element with an action. The following table describes the configurable settings:
Scroll Table Layout sortDirection ASC repeatTableHeaders default widths 30%,70% sortByColumn 1 sortEnabled false cellHighlighting true
Element | Specifies the element name (for example, "img", "div", or "a") that the action should apply to. To allow any element, enter Any into this field. |
---|---|
Attribute Name | Specifies the attribute name to identify the element (for example, "title", "id", or "name"). You can configure this value using one of the following mechanisms. |
Attribute Value | Specifies the expected value for the attribute supplied by the Attribute Name field.
|
Index | Specifies the element that matches the previous criteria. Entering
|
Many actions allow you to configure Window Name. This allows you to specify the name of the window you would like the action to occur in. Leaving this field blank indicates that the default window will be used.
Specifying Specialized Element Locators (CSS, ALT attribute, etc.)
You can specify a variety of specialized element locators by setting Element Locator to Use XPath, then setting one of the available locator prefixes to the desired value. Available prefixes are:
- alt=<alt attribute value>
- class=<class attribute value>
- css=<css-style locator>
- dom=<dom-style locator>
- id=<id attribute value>
- identifier=<id or name attribute value>
- link=<link text>
- name=<name attribute value>
- xpath=<xpath to element>
For example, to use the CSS locator tag.classA
, use the XPath locator css=tag.classA
Errors for Popup Dialogs
If one of the following types of JavaScript popup dialogs opens in an action other than Accept Script Dialog
, Dismiss Script Dialog
, or Type into Script Dialog
, then an error will be reported unless this is the last test in your scenario:
- alert
- confirm
- prompt
An error will not reported if a popup dialog opens during a wait action .
Accept Script Dialog
This action clicks OK on any of the three types of JavaScript popup dialogs: alert, confirm, and prompt.
Addselection
For a multiselect combo box, this action adds one option to the selection. This can be the first selection or an additional selection. To select multiple items, use this action multiple times.
Check
This action enables/disables a specified check box element.
Click
This action clicks the specified element.
Configuration notes:
- Use Key Modifiers to specify if you want to mimic the user pressing ALT, CRTL, or SHIFT during the click.
Close
This action closes the specified window.
Dismiss Script Dialog
For popup dialogs (alert, confirm, and prompt), this action either clicks Cancel (for confirm and prompt) or the X (for all three types of alert dialogs).
Doubleclick
This action double-clicks an element.
Dragdrop
This action drags one element to another location.
Configuration notes:
There are four ways to indicate how to move an element. For all of the following indicators, actions start at the element that will be dragged. All numbers are in pixels. The four options are:
- Move to target element: <some locator, like //div[@id="example"]> Drag the source element by clicking the top-left corner of the source element and dragging to the top-left corner of the target element.
Start at offset and move by delta: offsetX,offsetY|deltaX,deltaY Drag the source element starting at offsetX, offsetY from the top-left corner of the source element and moving deltaX, deltaY. Negative deltas move the element up and to the left.
- Move by delta: deltaX,deltaY Drag the source element by clicking down in the center of the element and moving deltaX, deltaY. Negative deltas move the element up and to the left.
- Move to offset within element: <some locator>|offsetX,offsetY Drag the source element by clicking the top-left corner of the source element and dragging to a point in the target element offset by offsetX,offsetY from the top-left corner of the target element. Offsets 0,0 would be the top-left corner exactly and would function the same as "Move to target element." Negative offsets would be a point above, or to the left of, the target element's top-left corner.
Execute JavaScript
This action executes the specified JavaScript within the context of the current web page. The specified JavaScript will execute in the same frame as the element defined by the element locator. If no element is defined, the JavaScript will execute in the top-most frame.
To configure this user action:
- Indicate what JavaScript should be executed. You can copy/type JavaScript into the text box or provide the path to a JavaScript file.
- Click Evaluate to check that the script will run (does not contain syntax errors). Errors from parsing functions in the JavaScript syntax will appear in the Error message field.
- Select the appropriate argument (the function from your script that you want to run) from the Method box at the bottom of the panel. This list include all function definitions contained in your script.
Configuration notes:
The locator that is specified in the Element Locator section will be passed as the first parameter to the specified function. For example, assume you have
function userFunction(locator) {
locator.click();
}
The element specified in the element locator would be passed to the function as the locator parameter in this script so that you can act on it as you wish.0 or 1 arguments are expected. When clicked, the dialog should say something like "0 or 1 arguments are expected in this script." When there is one argument, the argument is the element that was specified by the element locator in this user action.
Example - Clicking hidden elements:
Enter the following code into your Execute JavaScript action:
Code Block function click(element) { element.click(); }
- Choose click() from the Method dropdown.
- Enter the Element Locator criteria for the element upon which you would like to trigger a click.
Note that this code executes the click function on an element. In most cases, this will cause the click behavior to trigger. In some cases, this is insufficient and more code will be necessary to trigger the click.
Go Back
This action clicks the browser’s Back button. No arguments are needed.
Go Foward
This action clicks the browser’s Forward button. No arguments are needed.
Hover
This action hovers the pointer over the specified element.
Keydown / Keyup
These actions fire keydown or keyup JavaScript events on an element.
Configuration notes:
- The element locator specifies the element.
- The key locator specifies which key is pressed.
Maximize Window
This action maximizes the specified browser window.
Configuration notes:
- For Chrome on Mac, the Maximize Window action is interpreted as "size-to-best-fit" instead of "fill-screen," so the browser will only maximize vertically. This is the same behavior as if the user clicks the green ‘plus’ button to expand the window.
Navigate
This action navigates to the provided URL as though it was entered in the browser’s URL bar.
Configuration notes:
- In the URL field, you can enter a Fixed, Parameterized (if a data source is available), or Scripted URL. To enter a scripted URL, choose Scripted and click EditScript to enter a script method to return the URL that should be navigated to in the selected action.
Other
Enables you to add a custom action.
Refresh
This action has clicks Refresh.
Removeselection
In a multiselect combo box, this action removes one option from the selection. This is the equivalent of SHIFT-clicking on a selected combo box selection. To remove multiple items, use this action multiple times.
Right-click
This action right-clicks on the specified element.
Scroll By
This action scrolls the web application by the number of pixels specified for the x and y axis. Negative values indicate "scroll left" (for the x-axis) or "scroll up" (for the y-axis).
Scroll To
This action scrolls the web application to the specified pixel position (x and y axes).
Select
In a single-select combo box, this action selects a single option in the combo box. If an option is already selected, this action will change the selection.
Configuration notes:
- You can specify the option to select by the value (defined in the code) or label (shown in the UI as well as defined in the code).
Submit
This action submits a form, or an element within a form, to the remote server.
Configuration notes:
- Use the element selector to indicate which form to submit (for example, if there are multiple forms on a page).
Type
This action enters the specified text into the specified element.
- Use Value to specify what text you want entered. You can enter a Fixed, Parameterized (if a data source is available), or Scripted value. To enter a scripted value, choose Scripted value and click Edit Script to enter a script method to return the value that should be typed in the selected action.
- If you want to send special characters to the browser, either enter them directly into the Value field (valid only when typing produces an output or white space, such as tab, space, semicolon, add, and so on), or use special character mappings as outlined in Special Character Mappings for Type Actions below.
Type into Script Dialog
This action enters text into a prompt dialog.
Configuration notes:
- It must be placed immediately after the action that opens the dialog, and followed by an Accept Script Dialog action (which submits the specified text).
- If you want to send special characters to the browser, either enter them directly into the Value field (valid only when typing produces an output or moves the cursor, such as tab, space, semicolon, add, and so on), or use special character mappings as outlined in Special Character Mappings for Type Actions below.
Type Password
This action enters specified text into the specified element. The text will be masked in the field as well as encrypted upon storage.
- Use Value to specify what text you want typed. You can enter a Fixed, Parameterized (if a data source is available), or Scripted value. To enter a scripted value, choose Scripted and click EditScript to enter a script method to return the value that should be typed in the selected action.
- If you want to send special characters to the browser, either enter them directly into the Value field (valid only when typing produces an output or moves the cursor, such as tab, space, semicolon, add, and so on), or use special character mappings as outlined in Special Character Mappings for Type Actions below.
Uncheck
This action unchecks/clears a checked check box.
Wait
This action simulates the browser waiting the specified number of milliseconds before continuing to the next step.
- For Milliseconds, specify how long you want the browser to wait. You can enter a Fixed, Parameterized (if a data source is available), or Scripted value. To enter a scripted value, choose Scripted and click EditScript to enter a script method to return the value that should be typed in the selected action.
Special Character Mappings for Type Actions
You can use the following special character mappings to specify special characters within type
actions:
NULL \uE000
CANCEL \uE001
HELP \uE002
BACK_SPACE \uE003
TAB \uE004
CLEAR \uE005
RETURN \uE006
ENTER \uE007
SHIFT \uE008
CONTROL \uE009
ALT \uE00A
PAUSE \uE00B
ESCAPE \uE00C
SPACE \uE00D
PAGE_UP \uE00E
PAGE_DOWN \uE00F
END \uE010
HOME \uE011
LEFT \uE012
UP \uE013
RIGHT \uE014
DOWN \uE015
INSERT \uE016
DELETE \uE017
SEMICOLON \uE018
EQUALS \uE019
Number pad keys
NUMPAD0 \uE01A
NUMPAD1 \uE01B
NUMPAD2 \uE01C
NUMPAD3 \uE01D
NUMPAD4 \uE01E
NUMPAD5 \uE01F
NUMPAD6 \uE020
NUMPAD7 \uE021
NUMPAD8 \uE022
NUMPAD9 \uE023
MULTIPLY \uE024
ADD \uE025
SEPARATOR \uE026
SUBTRACT \uE027
DECIMAL \uE028
DIVIDE \uE029
Function keys
F1 \uE031
F2 \uE032
F3 \uE033
F4 \uE034
F5 \uE035
F6 \uE036
F7 \uE037
F8 \uE038
F9 \uE039
F10 \uE03A
F11 \uE03B
F12 \uE03C
META \uE03D
ZENKAKU_HANKAKU \uE040
These character mappings can be used with a scripted "Text Input" value such as the following script, which will type the word "test" and then send the tab key:
Code Block |
---|
def typeTestThenTab() { return "test\uE004"; } |
This does NOT act as a key modifier. For example, you CANNOT perform a CTRL-click by sending the control character and then performing a click. Sending the character simulates a user pressing and releasing the corresponding button.