...

We assume that you are familiar with Parasoft technologies and have already deployed and licensed the following products:

• dotTEST or Jtest 10.4.0 or higher
• Coverage Agent Manager (CAM) or SOAtest
  
• Parasoft DTP

...

• report.coverage.images -  Specifies a set of tags that are used to create coverage images in DTP. A coverage image is a unique identifier for aggregating coverage data from runs with the same build ID. DTP supports up to three coverage images per report.
• session.tag - Specifies a unique identifier for the test run and is used to distinguish different runs on the same build.
• build.id - Specifies a build identifier used to label results. It may be unique for each build, but it may also label several test sessions executed during a specified build.

...

1. Generating the static coverage file.
   The static coverage file (static_coverage.xml) is generated during the build process by Jtest or dotTEST in the .xml or .data format and . It is an XML file that contains metadata about user classes, methods, and lines.
2. Attaching the coverage agent Coverage Agent to the application under test (AUT).
   The coverage agent Coverage Agent ships with Jtest and dotTEST, and allows you to monitor the code being executed when the AUT is running.
3. Configuring the Parasoft product that you use for application testing: 
   • SOAtest must be configured to connect to the coverage agent and collect runtime coverage, merge it with static coverage, and upload the data to DTP.
   • Coverage Agent Manager (CAM) must be configured to connect to the coverage agent.
4. Performing tests on the AUT with your Parasoft product:
   • SOAtest will collect runtime coverage, merge it with static coverage, and upload the merged data to DTP.
   • CAM will collect runtime coverage and test results, which must be manually downloaded and sent to DTP (see steps 5-7).
5. (CAM only) Downloading test results and the dynamic (runtime) coverage.
   The data can be downloaded when a test session is finished and stopped in CAM.
6. (CAM only) Uploading the test results to DTP.
   Test results are uploaded via the DTP interface.
7. (CAM only) Merging the dynamic and static coverage data and sending it to DTP.
   Static and dynamic coverage is merged and uploaded to DTP by Jtest or dotTEST.
8. Reviewing the application coverage on DTP.
   Application coverage is displayed in the DTP's Coverage Explorer.

...

1. Connecting Coverage Agent Manager (CAM) to the Coverage Agent.
   Create the connection before you start interacting with the AUT.
2. Performing test sessions with CAM.
   CAM allows you to mark the beginning and end of test and test sessions while collecting coverage on the running AUT.
3. Downloading test results and the dynamic (runtime) coverage data when a test session is finished and stopped in CAM.
   The dynamic coverage data is saved in the runtime_coverage_[timestamp].data file. The test results are stored in the report.xml file.
4. Uploading the test results to DTP.
   Data Collector Upload Form allows you to upload the report.xml file to DTP.
5. Merging the dynamic and static coverage information and send it to DTP.
   Jtest or dotTEST merges the static coverage data (static_coverage.xml) and dynamic coverage data (runtime_coverage_[timestamp].data) into a coverage.xml file, and sends the coverage.xml file to DTP. If the coverage images, session tags, and build IDs associated with the coverage.xml file and report.xml file match, DTP can properly aggregate, associate, and display the data in a range of reporting mechanisms.

Image Added

Step 1: Generate the Static Coverage File

The static coverage file must be generated on the build machine that contains the source code. The name of the file is static_coverage.xml.

Generating Static Coverage

The static coverage file must be generated on the build machine that contains the source code. The name of the file is static_coverage.xml.

Generating Static Coverage with dotTEST

Run the following test configuration on the solution:

...

Attaching the Coverage Agent to the AUT allows you to enable collecting dynamic (runtime) coverage.

...

1. Deploy the AUT to the application server.
2. Copy the [DOTTEST_INSTALLATION_DIR]\integration\IIS directory to the machine where were IIS is installed and the AUT is deployed.
3. Run a console as Administrator.

4. Invoke the following command to launch the IIS Manager tool:

   Code Block
   dottest_iismanager.exe

5. Go to the following address to check the status of the coverage agent: http://host:8050/status. If the Coverage Agent is attached, you should receive the following response:

   Code Block
   {"session":null,"test":null}

...

1. Deploy the AUT to the application server.
2. Extract the contents of the monitor.zip package you generated (see Generating Static Coverage with Jtest) to the server machine. The package contains the agent.sh/agent.bat script.

3. Run the agent.sh/agent.bat script to print the Jtest Java agent VM argument to the console:

   Code Block
   Jtest Agent VM argument: -javaagent:"[path to agent dir]\agent.jar"=settings="[path to agent properties file]\agent.properties",runtimeData="[path to monitor dir]\monitor\ runtime_coverage"

4. Add the -javaagent argument to the application server’s startup script.
5. Restart the server.

6. Go to the following address to check the status of the coverage agent: http://host:8050/status. If the Coverage Agent is attached, you should receive the following response:

   Code Block
   {"test":null,"session":null,"testCase":null}

Anchor
connect_cam_agent connect_cam_agent

Step 3:

...

Connect CAM or

...

SOAtest to the Coverage Agent

You need to configure the Parasoft product that you use for application testing. You can use either Coverage Agent Manager (CAM) or SOAtestcan connect to either CAM or SOAtest to the Coverage Agent. CAM provides an interface for starting and stopping test sessions during manual test execution. Connecting SOAtest enables you to collect application coverage during automated functional test execution.  

...

Connecting CAM to the Coverage Agent

...

• connect to the Coverage Agent.
• collect runtime coverage.
• merge runtime coverage with static coverage (see Step 1).
• upload the merged data to DTP.

1. Open CAM in a browser:

   Code Block
   http://[

Connecting CAM to the Coverage Agent

1. Open CAM in a browser:

   Code Block
   http://[your-Tomcat-host:port]/cam.

2. Click Agents.
   
   
3. Click Add Connection to configure the connection with the Coverage Agent.
   Agent Name: Any user-friendly string that you want to display in CAM (for example, the name of the application).
   Agent Address: The URL of the server where the Coverage Agent is attached to the AUT (see Step 2). The default port number for the Coverage Agent is 8050.
4. Click Test to verify the connection.
   
5. Click Connect after successfully testing the connection.

Anchor
connect_SOA connect_SOA

Connecting SOAtest to the Coverage Agent

...

The connection to the coverage agent is handled through a SOAtest test configuration.

1. Open SOAtest and choose Parasoft> Test Configurations.
2. Right-click the Demo Configuration in the Built-in folder and choose Duplicate. This will create an editable duplicate in the User-defined test configuration folder.
3. Rename the duplicate test configuration and click the Execution tab. 
4. Click the Application Coverage tab and configure the following settings:
   • Enable the Enable Test Execution option. 
   • Enable the Collect application coverage option.
   • Specify the host or IP address of the AUT in the Coverage agent host field. The coverage agent should have been attached to the AUT in the previous step.
   • Specify the port number for the coverage agent. The default number is 8050.
   • If you are using multiple-user mode, specify an agent user ID, such as the current SOAtest username. This enables coverage to be associated with a specific user or client. Do not specify an agent user ID if the agent is not in multiple-user mode.
   • Enable the Report coverage agent connection failures as test failures option if you want test failures reported when the coverage agent connection fails. If the option is disabled, connection problems will only be reported to the console.
   • Enable the Retrieve coverage data and specify the where you want the store the dynamic coverage data in the Coverage data storage directory field. 
   • Enable Delete coverage data on retrieval option if you want the coverage data on the AUT to be deleted as soon as SOAtest retrieves it. We recommend enabling this option in order to prevent the taking up disk space on the coverage agent machine.
5. Apply the Test Configuration.
6. Right-click the new Test Configuration and choose Export.
7.   

In the next step, you will execute your tests using the new test configuration from the command line. But in order for DTP to associated the test results with the coverage information, you will need to create a properties file and specify the build ID used to create the static coverage file. The simplest way is to export the properties referenced by the SOAtest desktop.

1. Choose Parasoft> Preferences from the SOAtest menu.
2. Click the share link on the Parasoft page.
3. Specify a name and location to export the settings file.
4. Enable any settings you want to include in the file and click OK.
5. Open the exported file and add the following properties:
   1. report.coverage.images -  Specifies a set of tags that are used to create coverage images in DTP. A coverage image is a unique identifier for aggregating coverage data from runs with the same build ID. DTP supports up to three coverage images per report.
   2. session.tag - Specifies a unique identifier for the test run and is used to distinguish different runs on the same build.
   3. build.id - Specifies a build identifier used to label results. It may be unique for each build, but it may also label several test sessions executed during a specified build.
6. Save the changes.

Step 4: Perform Testing Sessions

Parasoft provides several ways to execute tests. You can execute tests manually or automate test scenario execution using the command line interfaces. In this guide, we will demonstrate executing manual test scenarios with CAM. We will also describe automated test execution with SOAtest. 

Execute Test Scenarios with CAM

To collect coverage data, you need to start a session. Only one tests session can be in progress at a time.

1. Click the New Session button, enter the following information when prompted:
   
   • Session Name: the name of the session
   • Project: the name of the project in DTP that the results will be associated with
   • Build ID: A build identifier for

1. Open SOAtest and go to Preferences> Reports> Coverage and specify the installation directory of dotTEST or Jtest.
2. Configure a SOAtest test configuration to collect, merge, and upload application coverage data. You can configure an existing test configuration or create and configure a new one.
   
   1. Open the test configuration that you want to configure to collect application coverage data.
   2. Open the Execution> Application Coverage tab.
   3. Enable the Collect application coverage option and specify the host name or IP address where the application under test and coverage agent are hosted and the port number of the agent. The port number should match the value of the jtest.agent.port setting in the agent.properties file (default is  8050). You can click Test Connection to verify that SOAtest can communicate with the coverage agent. 
   4. (Optional) Under Coverage agent user ID, you can specify a user ID so that coverage results can be associated with a specific user. A user ID should only be specified when application coverage for multiple users is enabled for the coverage agent.
   5. Enable the Upload coverage report to DTP option to enable merging static and runtime coverage data and sending the merged coverage results to DTP.
   6. Configure the Static coverage file location option to specify the path to the static coverage file generated with dotTEST or Jtest in the .xml or .data format (see Step 1).
   7. Configure the Coverage image tags option to specify a set of tags that are used to create coverage images in DTP. A coverage image is a unique identifier for aggregating coverage data from runs with the same build ID. For details, see the Parasoft DTP user guide at https://docs.parasoft.com.
   8. Enable the Report coverage agent connection failures as test failures option for test failures to be reported when the coverage agent connection fails, or when the static coverage file location is misconfigured. Otherwise, the problems will be reported to the console, but will not cause the test to fail.
   9. Click Apply to save your changes.
   10. (Optional) Save the test configuration to your workspace. This step makes running the configuration on the SOAtest command line more convenient:
       1. Right-click the new test configuration and choose Export.
       2. Save the test configuration to the SOAtest workspace. 

In the next step, you will execute your tests using the new test configuration from the command line. But in order for DTP to associated the test results with the coverage information, you will need to create a properties file and specify the settings required for DTP to properly match and display application coverage data. The simplest way is to export the properties referenced by the SOAtest desktop.

1. Choose Parasoft> Preferences from the SOAtest menu.
2. Click the share link on the Parasoft page.
3. Specify a name and location to export the settings file.
4. Enable any settings you want to include in the file and click OK.
5. Open the exported file and add the following properties:
6. report.coverage.images -  Specifies a set of tags that are used to create coverage images in DTP. A coverage image is a unique identifier for aggregating coverage data from runs with the same build ID. DTP supports up to three coverage images per report.
7. session.tag - Specifies a unique identifier for the test run and is used to distinguish different runs on the same build.
build.id - Specifies a build identifier used to
• label results. It may be unique for each build
,
• but
it
• may also label
several
• more than one test sessions that were executed during a specified build.
If you want to merge SOAtest coverage results with results from other types of testing—such as unit testing and manual testing of the same application—they must all use the same build ID. The build ID set in this file must match the build ID set for dotTEST or Jtest when collecting static coverage.
8. dtp.project - Specifies the project on DTP with which you want to associate the coverage results. The DTP project set in this file must match the DTP project set for dotTEST or Jtest when collecting static coverage.
9. Save the changes.

Step 4: Perform Testing Sessions

Parasoft provides several ways to execute tests. You can execute tests manually or automate test scenario execution using the command line interfaces. In this guide, we will demonstrate executing manual test scenarios with CAM. We will also describe automated test execution with SOAtest. 

Execute Test Scenarios with CAM

To collect coverage data, you need to start a session. Only one tests session can be in progress at a time.

1. Click the New Session button, enter the following information when prompted:
   
   • Session Name: the name of the session
   • Project: the name of the project in DTP that the results will be associated with
   • Build ID: A build identifier for label results. It may be unique for each build but may also label more than one test sessions that were executed during a specified build.
   This information is critical for the data to be properly merged and correlated in DTP.
   Image Removed
2. Click the Start Session button to begin a new test session.
3. Click the New Test button.
   Image Removed
   
4. Enter a name and click Start Test to continue.
5. Perform your manual test on the AUT and enter the data associated with the test.
   Ensure that you select the correct Test result option (Pass/Fail/Incomplete).
   Image Removed
   
6. Click Stop Test when finished.
7. Continue adding and performing your tests until your scenario is complete.
   Ensure that you stop and start tests in between interacting with the AUT.
8. Click Stop Session when you’ve completed your tests.

Execute Test Scenarios with SOAtest

Run SOAtest in the command line mode using the test configuration and the .properties file created in the previous step. You will also need to include the workspace and test assets (.tst files).

./soatestcli -config "/path/to/your/test-configuration/app-cov.properties" -data "/path/to/your/workspace" -resource "/path/to/your/tests/your_tests.tst" -localsettings "/path/to/your/localsettings/file/soatest-app-cov.properties"

Step 5: (CAM only) Download Coverage and Test Results

1. Click Download Coverage to download the runtime_coverage_[timestamp].data file and note the location.
2. Click Download Test Results to download the report.xml file and note the location.
   Image Removed

Step 6: (CAM only) Upload the Test Results to DTP

Upload the report.xml file you downloaded from CAM to DTP. If you used SOAtest to execute your tests, the report will be saved in the location specified with the -report  flag. If you did not specify a location for the report, the file will be saved to the working directory.  Uploading test results to DTP allows you to associate coverage data with individual tests and view the information on DTP.  

1. Go to Report Center in the DTP interface.
2. Click the gear icon and choose Report Center Settings> Additional Settings> Data Collector Upload Form (requires admin permissions).
3. Click Choose File and browse for the report.xml file you downloaded from CAM.
4. Click the Upload button to upload the file to DTP.

Step 7: (CAM only) Merge the Static and Dynamic Coverage Data and Send to DTP

The static and dynamic coverage data must be merged into one coverage.xml file. To merge the coverage data and send the merged information to DTP, run dotTEST or Jtest with the following arguments:

• -staticcoverage - Provides the path to the static_coverage.xml generated by dotTEST or Jtest
• -runtimeCoverage - Provides the path to the runtime_coverage_[timestamp].data downloaded via CAM or generated by SOAtest. You can provide a path to a folder that contains many .data files from multiple testing sessions.
• -publish - sends the merged coverage data to DTP
• (Jtest only) -config "builtin://Calculate Application Coverage" - specifies the built-in test configuration required to merge the coverage data

Your command line may resemble the following:

dotTEST

dottestcli.exe -staticcoverage [path] -runtimecoverage [path]  -publish

Jtest

jtestcli -staticcoverage [path] -runtimecoverage [path/dir] -config "builtin://Calculate Application Coverage" -publish

The -publish option is required to send the merged coverage data to DTP. Alternatively, you can configure the report.dtp.publish=true option in the .properties file where you configure dotTEST or Jtest.

Step 8: Reviewing Application Coverage Results in DTP

In order to view coverage in the DTP dashboard, you will need to associate the coverage data sent to DTP with the filter.

...

1. This information is critical for the data to be properly merged and correlated in DTP.
   Image Added
2. Click the Start Session button to begin a new test session.
3. Click the New Test button.
   Image Added
   
4. Enter a name and click Start Test to continue.
5. Perform your manual test on the AUT and enter the data associated with the test.
   Ensure that you select the correct Test result option (Pass/Fail/Incomplete).
   Image Added
   
6. Click Stop Test when finished.
7. Continue adding and performing your tests until your scenario is complete.
   Ensure that you stop and start tests in between interacting with the AUT.
8. Click Stop Session when you’ve completed your tests.

Execute Test Scenarios with SOAtest

Run the soatestcli and using test configuration created in the previous step. You will also need to include the workspace, test assets (.tst files), and properties file. The -report  flag is optional, but specifying an easy-to-remember location may be helpful as you become familiar with the application coverage workflow:

./soatestcli -config "/path/to/your/test-configuration/app-cov.properties" -data "/path/to/your/workspace" -resource "/path/to/your/tests/your_tests.tst" -localsettings "/path/to/your/localsettings/file/soatest-app-cov.properties" -report "/directory/to/save/report/"

Step 5: (CAM only) Download Coverage and Test Results

1. Click Download Coverage to download the runtime_coverage_[timestamp].data file and note the location.
2. Click Download Test Results to download the report.xml file and note the location.
   Image Added

Step 6: Upload the Test Results to DTP

Upload the report.xml file you downloaded from CAM to DTP. If you used SOAtest to execute your tests, the report will be saved in the location specified with the -report  flag. If you did not specify a location for the report, the file will be saved to the working directory.  Uploading test results to DTP allows you to associate coverage data with individual tests and view the information on DTP.  

1. Go to Report Center in the DTP interface.
2. Click the gear icon and choose Report Center Settings> Additional Settings> Data Collector Upload Form (requires admin permissions).
3. Click Choose File and browse for the report.xml file you downloaded from CAM.
4. Click the Upload button to upload the file to DTP.

Step 7: Merge the Static and Dynamic Coverage Data and Send to DTP

The static and dynamic coverage data must be merged into one coverage.xml file. To merge the coverage data and send the merged information to DTP, run dotTEST or Jtest with the following arguments:

• -staticcoverage - Provides the path to the static_coverage.xml generated by dotTEST or Jtest
• -runtimeCoverage - Provides the path to the runtime_coverage_[timestamp].data downloaded via CAM or generated by SOAtest. You can provide a path to a folder that contains many .data files from multiple testing sessions.
• -publish - sends the merged coverage data to DTP
• (Jtest only) -config "builtin://Calculate Application Coverage" - specifies the built-in test configuration required to merge the coverage data

Your command line may resemble the following:

dotTEST

dottestcli.exe -runtimeCoverage [path] -staticCoverage [path] -publish

Jtest

jtestcli -staticcoverage [path] -runtimecoverage [path/dir] -config "builtin://Calculate Application Coverage" -publish

The -publish option is required to send the merged coverage data to DTP. Alternatively, you can configure the report.dtp.publish=true option in the .properties file where you configure dotTEST or Jtest.

...

Collecting Application Coverage from Multiple Users

...

1. Configure the Coverage Agent to enable the multiple-user mode; see Configuring the Coverage Agent to Run in the Multiple-User Mode.
2. Specify your User ID for the connection with the Coverage Agent attached to the AUT. This will enable will enable the Coverage Agent to identify and assign coverage information to individual users who are simultaneously interacting with the AUT.
   - If you use SOAtest, provide your User ID on the Application Coverage tab of your test configuration; see Connecting SOAtest to the Coverage Agent.
   - If you use CAM, add your User ID to the HTTP request header of the browser you will use to interact with the tested web application web application and then provide the same User ID when connecting CAM to the Coverage Agent; see Specifying User ID for Testing with CAM.

Anchor
enable_multiuser enable_multiuser

Configuring the Coverage Agent to Run in the Multiple-User Mode

...

You can enable the multiple-user mode by modifying the options in the the agent.properties file, which is included in the monitor.zip package (see Generating Static Coverage with Jtest). Open the file and configure the following option:

...

Perform testing sessions, download the results, and merge mergee the coverage data, as described in steps 4-7 above. When downloading the results from CAM, ensure that the Session Tag field is completed with a tag unique to each user. We recommend that the session tag include the User ID.

...