Page History

Functional Tests Properties

com.parasoft.xtest.execution.api.web.execute_functional_tests

This setting enables/disables functional test execution. Set this property to true to enable functional test execution. Default is true.

Example

com.parasoft.xtest.execution.api.web.execute_functional_tests=true

com.parasoft.xtest.execution.api.web.report_successful_traffic

This setting enables/disables the "Test Traffic [All Tests]" section in the API coverage report. The section contains traffic for all test executions, whether or not the tests were successful. Set this property to true to include the Test Traffic [All Tests] section in the report. Default is true. 

Example

com.parasoft.xtest.execution.api.web.report_successful_traffic=true

com.parasoft.xtest.execution.api.web.report_traffic_limit

This setting specifies the total amount of traffic data (in KBs) stored during a test execution session, not the amount of data stored per test. The com.parasoft.xtest.execution.api.web.report_successful_traffic setting must be enabled for this property to take effect. Only data from successful tests will count toward the limit if the com.parasoft.xtest.execution.api.web.report_successful_traffic property is enabled. The default is 500.

Example

com.parasoft.xtest.execution.api.web.report_traffic_limit=500

API Coverage Properties

com.parasoft.xtest.execution.api.web.coverage_ref_by_tests

This setting determines if coverable resources from the service definition are included in the API coverage report. If a constrained SOAP Client, REST Client, or Messaging Client tool touches a coverable resource, coverage information will be associated with the appropriate resource/operation. The following service definitions are supported:

• OpenAPI/Swagger
• RAML
• WADL
• WSDL

Default is false. 

Example

com.parasoft.xtest.execution.api.web.coverage_ref_by_tests=true

com.parasoft.xtest.execution.api.web.perform_service_coverage_calculation

This setting enables/disables API coverage calculation for a user-defined list of coverable resources. You can specify the resources in the com.parasoft.xtest.execution.api.web.service_coverage_table setting. 

Coverage can be calculated in addition to, or instead of, the automatically-calculated coverable resources. Default is false.

com.parasoft.xtest.execution.api.web.service_coverage_table

This setting specifies a list of resources that should be included as part the API coverage calculation. Specify a semicolon-separated list of definitions using the following format:

<definition_type>@<URI>

The following definition types are supported:

• OpenAPI/Swagger
• RAML
• WADL
• WSDL

Example

com.parasoft.xtest.execution.api.web.service_coverage_table=WSDL@http://soatest.parasoft.com/calculator.wsdl;OpenAPI/Swagger@file:///C:/openapi3.0/examples/v3.0/petstore.yaml;OpenAPI/Swagger@http://localhost:8080/soavirt/api/v5/def

In this example, the property would include coverage information for the following resources:

• WSDL@http://soatest.parasoft.com/calculator.wsdl
• OpenAPI/Swagger@file:///C:/openapi3.0/examples/v3.0/petstore.yaml
• OpenAPI/Swagger@http://localhost:8080/soavirt/api/v5/def

Application Coverage Properties

Anchor
com.parasoft.xtest.execution.api.web.collect_application_coverage com.parasoft.xtest.execution.api.web.collect_application_coverage

com.parasoft.xtest.execution.api.web.collect_application_coverage

This setting enables/disables collecting application coverage data with the coverage agent. The default is false. 

Example

com.parasoft.xtest.execution.api.web.collect_application_coverage=true

Anchor
com.parasoft.xtest.execution.api.web.application_coverage_host com.parasoft.xtest.execution.api.web.application_coverage_host

com.parasoft.xtest.execution.api.web.application_coverage_host

This setting specifies the host name or IP address of the machine where the coverage agent resides.

Example

com.parasoft.xtest.execution.api.web.application_coverage_host=myserver1.mycompany.com

Anchor
com.parasoft.xtest.execution.api.web.application_coverage_port com.parasoft.xtest.execution.api.web.application_coverage_port

com.parasoft.xtest.execution.api.web.application_coverage_port

This setting specifies the coverage agent’s port. The default is 8050.

Example

com.parasoft.xtest.execution.api.web.application_coverage_port=8050

com.parasoft.xtest.execution.api.web.application_coverage_user_id

This setting specifies  a user ID so that coverage results can be associated with a specific user. A user ID should only be specified when the coverage agent is configured to run in the multi-user mode. For details, see the user guide for your Parasoft code analysis tool (Parasoft Jtest or Parasoft dotTEST) at https://docs.parasoft.com.

Example

com.parasoft.xtest.execution.api.web.application_coverage_user_id=user_qa21

com.parasoft.xtest.execution.api.web.application_coverage_report_as_test_failure

This setting enables/disables reporting test failures when the coverage agent connection fails, or when the location of the static coverage file is misconfigured. Otherwise connection problems will be reported to the console, but will not cause the test to fail. The default is false. 

Example

com.parasoft.xtest.execution.api.web.application_coverage_report_as_test_failure=true

com.parasoft.xtest.execution.api.web.application_coverage_upload_to_dtp

This setting enables/disables sending application coverage results to DTP. It requires the com.parasoft.xtest.execution.api.web.collect_application_coverage option to be enabled. The default is true.

In addition, sending results to DTP requires the following settings to be configured:

• com.parasoft.xtest.execution.api.web.application_coverage_host
• com.parasoft.xtest.execution.api.web.application_coverage_port
• com.parasoft.xtest.execution.api.web.application_coverage_static_coverage_file
• com.parasoft.xtest.execution.api.web.application_coverage_image_tags

Example

com.parasoft.xtest.execution.api.web.application_coverage_upload_to_dtp=true

Anchor
com.parasoft.xtest.execution.api.web.application_coverage_static_coverage_file com.parasoft.xtest.execution.api.web.application_coverage_static_coverage_file

com.parasoft.xtest.execution.api.web.application_coverage_static_coverage_file

This setting specifies the path to the static coverage file generated by your Parasoft code analysis tool (Parasoft Jtest or Parasoft dotTEST) in the .xml or .data format. For details, see the Parasoft Jtest or Parasoft dotTEST user guide at https://docs.parasoft.com.

Example

com.parasoft.xtest.execution.api.web.application_coverage_static_coverage_file=C:\projects\MyApp\target\jtest\monitor\static_coverage.xml

Anchor
com.parasoft.xtest.execution.api.web.application_coverage_image_tags com.parasoft.xtest.execution.api.web.application_coverage_image_tags

com.parasoft.xtest.execution.api.web.application_coverage_image_tags

This setting specifies a set of tags that are used to create coverage images in DTP. A coverage image is a unique identifier for aggregating coverage data from runs with the same build ID. For details, see the Parasoft DTP user guide at https://docs.parasoft.com.

Example

com.parasoft.xtest.execution.api.web.application_coverage_image_tags=FT;AppCov;Aggregate

API Security Properties

Anchor
com.parasoft.xtest.execution.api.web.api_security_policy com.parasoft.xtest.execution.api.web.api_security_policy

com.parasoft.xtest.execution.api.web.api_security_policy

This setting specifies whether a default or custom scan policy is used. The value must be either default or custom. The default is default.

Example

com.parasoft.xtest.execution.api.web.api_security_policy=custom

Anchor
com.parasoft.xtest.execution.api.web.api_security_custom_policy_location com.parasoft.xtest.execution.api.web.api_security_custom_policy_location

com.parasoft.xtest.execution.api.web.api_security_custom_policy_location

This setting specifies the location of a custom scan policy file. This property value is ignored if com.parasoft.xtest.execution.api.web.api_security_policy is set to default. For more information, see "Configuring Scan Policies" on the Penetration Testing page.

Example

com.parasoft.xtest.execution.api.web.api_security_custom_policy_location=C:\projects\soatest\security\custom_security_policy.xml

Anchor
com.parasoft.xtest.execution.api.web.api_security_timeout com.parasoft.xtest.execution.api.web.api_security_timeout

com.parasoft.xtest.execution.api.web.api_security_timeout

This setting specifies the timeout period for the Penetration Testing Tool in seconds. The default is 300.

Example

com.parasoft.xtest.execution.api.web.api_security_timeout=300